Electrolux 99852 G manual Cut Out Size, Building over a cupboard or drawer

Page 14

Instructions for the Installer

Cut Out Size

The dimensions of the cut-out are given in the diagram.

510	880
0
8	30
4	30
	830
	150 min
FO 2349

Building In

Building over a cupboard or drawer

If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface.

It is also recommended to carry out the electrical connection to the hob as shown in diagrams 1 and 2 (See next page).

Image 14

Contents 99852 G Child Safety Important Safety InformationInstallation During UseService Environmental InformationContents Installation Description of the HobOperation Hob burnersPan Supports Maintenance and CleaningHob Top BurnersSomething Not Working? Ignition electrodeCustomer Care Service and Spare Parts0870 5 929 Guarantee Conditions Standard guarantee conditionsInstructions for the Installer Engineers technical dataImportant safety requirements LocationInstallation Gas ConnectionBuilding over a cupboard or drawer BuildingCut Out Size Building over a kitchen unit with door Fitting the hob to the worktop Electrical connections This HOB Must be EarthedPermanent Connection Wiring diagramReplacement of the cable Fault Finding Preliminary Electrical Systems CheckEarth Continuity Check Ignition System / Gas Ignition Pressure Testing CommissioningMethod To adjust the gas rateConversion from Natural Gas to LPG AEG Hausgeräte GmbH Postfach 90327 Nürnberg Electrolux plc