Electrolux 99852 G manual Description of the Hob, Installation

Page 5

Description of the Hob

	4	2
1	2	2
1

3

5

1.Hob Top

2.Semi-rapid Burners

3.Auxiliary Burner

4.Ultra-rapid Burner (triple crown)

5.Control knobs

INSTALLATION

Any gas installation must be carried out by a registered CORGI installer, and in accordance with existing rules and regulations.

The relevant instructions are to be found in the second section of this manual.

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory.

5

Image 5

Contents 99852 G Installation Important Safety InformationChild Safety During UseEnvironmental Information ServiceContents Description of the Hob InstallationHob burners OperationHob Top Maintenance and CleaningPan Supports BurnersIgnition electrode Something Not Working?Customer Care Service and Spare Parts0870 5 929 Standard guarantee conditions Guarantee ConditionsEngineers technical data Instructions for the InstallerLocation Important safety requirementsGas Connection InstallationBuilding over a cupboard or drawer BuildingCut Out Size Building over a kitchen unit with door Fitting the hob to the worktop This HOB Must be Earthed Electrical connectionsPermanent Connection Wiring diagramReplacement of the cable Preliminary Electrical Systems Check Fault FindingEarth Continuity Check Ignition System / Gas Ignition Commissioning Pressure TestingMethod To adjust the gas rateConversion from Natural Gas to LPG AEG Hausgeräte GmbH Postfach 90327 Nürnberg Electrolux plc