Frigidaire 316902202 important safety instructions To assemble the Effortless Oven Rack system

Page 8

BEFORE SETTING OVEN CONTROLS

Effortless™ Oven Rack system

Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed.

To assemble the Effortless™ Oven Rack system:

1.

Locate all required parts. You will need the supplied

 

oven rack (Effortless™ Oven Rack is a flat rack with a

 

special dark coating on the left and right rack

 

sides) and the 2 supplied chrome connector arms.

2.

Open the oven door. Be sure the oven is completely

 

cool before proceeding.

3.

Place the oven rack in positions 2, 3 or 4 only (see

 

previous page to verify positions). Be sure the rack

 

connector brackets are at the rear of the range and

 

pointing towards oven bottom (See Fig. 2).

4.

Assemble one connector arm at a time. With the oven

 

door open and the oven rack in place, install one end of

IMPORTANT

Only the Effortless™ Oven Rack system should be used in oven rack position 2. Placing ANY other rack in oven rack position 2 will prevent the oven door from fully closing and may damage the oven door, oven cavity or the door connector brackets.

If the rack system is not assembled with the connector arms the Effortless™ Oven rack may be used in oven rack positions 2 through 6. Do not attempt to use the Effortless™ Oven rack in rack position 1.

door

rack connector

connector

bracket

bracket

 

 

the connector arm to the hole in the door connector

 

bracket (Fig. 1) and the other end in the hole in the

 

rack connector bracket (Fig. 2 and as in Fig. 3). The

 

oven rack may need to be adjusted in or out in the rack

 

position to match the length of the connector arm.

5.

While holding the connector arm in place, twist the

 

connector arm so the ends of the connector arm point

 

upwards (See Figs. 4 & 5). The connector arm should

 

now be locked into position.

6.

Repeat steps 4 and 5 for the other connector arm.

7.

Once both connector arms are properly in place, be

Fig. 1

connector

arm

Fig. 3 - assembly of the Effortless™ Oven Rack

Fig. 2

oven rack

sure to test the oven rack operation by gently closing

the oven door. The oven rack should move in and out of

the oven freely when the door is opened or closed.

CAUTION

REMOVE ALL OVEN RACKS and accessories before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the glide ability of the Effortless™ Oven Rack system will be damaged and will cause oven racks to loose their shiny finish and or turn blue. Remove ALL oven racks and clean according to instructions provided in the Care & Cleaning section of this manual.

Make sure the oven and oven racks are COMPLETELY cool and safe to touch before attempting to assemble or disassemble the Effortless™ Oven Rack system. Never pick up hot oven rack parts.

open oven

connector

door

arm

connector arm

Fig. 4

connector

arm

Fig. 5

left and right

door connector

brackets

with connector arm ends shown in locked position (pointing upwards)

Fig. 6 - Effortless™ Oven Rack after assembly

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use&Care Contents Product Record and RegistrationTip Over Hazard Important Safety InstructionsDefinitions Important Instructions for Using Your Oven SELF-CLEANING Ovens Features AT a Glance Your electric range features includeBefore Setting Oven Controls Oven vent locationRemoving, replacing & arranging racks Types of oven racksSpecial dark coating on the left and right rack Effortless Oven Rack systemTo assemble the Effortless Oven Rack system Before Setting Surface Controls Air circulation in the ovenBaking layer cakes with 1 or 2 oven racks About the ceramic glass cooktopUsing proper cookware Cookware material typesCooktop element power level display windows Available power level settingsSabbath Day feature Sb message Lockout window messageTo operate a single radiant surface element Step Press Setting Surface ControlsSingle radiant surface elements Dual radiant surface elements To operate dual radiant surface elements Step PressTriple radiant surface element some models To operate the triple radiant surface element Step PressPress on-off Keep warm zone temperature selectionKeep warm zone Home Canning Minimum & maximum control settings Feature Min. temp. /timeOven Control Functions Max. temp. /time 550F / 288C 550F / 288C 550F / 288CSetting Oven Controls Setting the clockSetting 12 or 24 hour display modes Changing oven temperature displaySetting a silent control panel Setting lockoutSetting the minute timer Add a minute featureSetting quick preheat Setting bakeSetting bake time When the set bake time runs outSetting Oven Controls Benefits of the convect feature Convect roast all modelsSuggestions for convect baking Press convectSuggestions for convect broil Setting convect convection convertConvect broil some models Suggested broil settings table electric oven BroilTo set broil Step Press Leave the oven door openSetting pizza feature Setting chicken nuggets featureSetting chicken nuggets feature cont’d Setting keep warmOperating the oven light Adjusting the oven temperatureRestoring factory default settings Bake time and delay start pads To Set the Sabbath Feature for use onIf a timed bake or delayed timed bake is needed To Set the Sabbath Feature cont’d Keep warm drawer indicator light Keep Warm DrawerOperating the keep warm drawer Operating keep warm drawerArranging keep warm drawer rack positions Keep warm drawer recommended settingsKeep warm drawer recommended food settings FoodItem Setting Adhere to the following self-clean precautions SELF-CLEANINGSelf-cleaning Press delay start When the self-clean cycle has completedCare & Cleaning Cleaning recommendation tableCooktop maintenance Cooktop cleaningDo not For light to moderate soilTo replace the oven light bulb Cooktop cleaning cont’dReplacing the oven light To replace oven door Removing and replacing the lift-off oven doorTo remove oven door Problem Solution Used. See Cooktop Cleaning and Maintenance in the Care CleaningsectionMajor Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies

316902202 specifications

The Frigidaire 316902202 is a high-performance range oven igniter designed to enhance the cooking experience in any kitchen. Specifically engineered to provide reliable ignition for both gas ranges and ovens, this component is a vital part of the cooking appliance. Its quality construction and innovative design make it a perfect choice for homeowners and professional chefs alike.

One of the key features of the Frigidaire 316902202 is its compatibility with a wide range of gas oven models. This universal fit ensures that installations are straightforward, regardless of the appliance brand. The igniter operates seamlessly with the cooking system, delivering a consistent spark that ignites the gas efficiently, ensuring that your stovetop and oven can reach the desired temperatures quickly and reliably.

Incorporating cutting-edge technologies, the Frigidaire 316902202 utilizes advanced ceramic materials that withstand high temperatures. This durability extends the lifespan of the igniter, minimizing the need for frequent replacements. Its resistance to wear and tear is a crucial characteristic, especially for busy kitchens where appliances are used multiple times a day.

The installation process of the Frigidaire igniter is designed to be user-friendly. With clear instructions and practical design considerations, homeowners can replace old or faulty igniters without requiring professional assistance. This ease of installation empowers users to maintain their kitchens effectively and ensures they can enjoy uninterrupted cooking.

Moreover, the Frigidaire 316902202 boasts energy-efficient performance. By providing a reliable ignition source, it reduces wasted gas and ensures that cooking times are optimized. This efficient use of energy not only contributes to lower utility bills but also aligns with eco-friendly practices, making it a thoughtful choice for environmentally conscious consumers.

In summary, the Frigidaire 316902202 range oven igniter stands out with its compatibility, durability, ease of installation, and energy efficiency. As a crucial component of gas cooking appliances, it empowers users to cook with precision and confidence. Whether you're preparing a family dinner or a gourmet meal, this igniter supports a hassle-free cooking experience, ensuring that every dish is cooked to perfection. Investing in the Frigidaire 316902202 means investing in quality, efficiency, and reliability for your culinary endeavors.
Top Page Image Contents