Frigidaire 316454912 2b. Models Requiring Power Supply Cord KIT, Electrical Connection to Range

Page 3

INSTALLATION INSTRUCTIONS FOR FREESTANDING ELECTRIC RANGE

2b. MODELS REQUIRING POWER SUPPLY CORD KIT.

RISK OF FIRE OR ELECTRICAL SHOCK MAY OCCUR IF AN INCORRECT SIZE RANGE CORD KIT IS USED, THE INSTALLATION INSTRUCTIONS ARE NOT FOLLOWED OR STRAIN RELIEF BRACKET IS DISCARDED.

This appliance may be connected by means of a power supply cord. Only a power supply cord kit rated at 125/250 volts minimum, and marked for use with ranges shall be used. See Fig. 10 for cord kit ampere rating information. Cord must have either three (3) or four (4) conductors (See Fig. 8). Terminals on end of wires must be either closed loop or open-end spade lugs with upturned ends. Cord must have strain relief properly installed. See Steps 4a. for 4-Wire or 4b. for 3-Wire connections.

3. ELECTRICAL CONNECTION TO RANGE.

The Rear Access Cover must be removed (Fig 9). To remove, loosen center screw (one screw) and remove cover. The terminal block will then be accessible.

3 & 4 - Wire electrical wall Receptacle types & recommended mounting orientation on wall

Required for new and remodeled installations

4-Wire Wall

receptacle (14-50R)

Allowed for

existing installations

3 Wire Wall

receptacle (10-50R)

Fig. 8

NOTE: Range is shipped from factory with 1-3/8" dia. hole as shown. To use either 7/8" dia. hole or 1-1/8" dia. knockouts refer to Fig. 9.

Rear

Access

Cover

Fig. 11

4A. POWER CORD CONNECTIONS

(4-Wire Connection Instructions - Refer to Fig.12)

Before wiring the range review the suggested power source location drawing in Fig. 3. If connecting to a 4-Wire electrical system (new branch-circuit or mobile home requires 4-Wire connection):

1.Follow the manufacturer’s installation instructions supplied with the strain relief and install (Also see Figs. 9, 10 & 11).

2.Insert the end connectors for Line 1, Line 2 and Neutral and tighten securely to the terminal block.

IMPORTANT NOTE: DO NOT LOOSEN the factory installed nut connections which secure the range wiring to the terminal block. Electrical failure or loss of electrical connection may occur if these 3 nuts are loosened or removed.

3.You must disconnect the ground strap. Remove the factory installed ground screw & plate to release the copper ground strap from the frame of the appliance. Cut and discard the copper ground strap & plate. KEEP the ground screw.

4.Connect the ground wire (Green) lead with the eyelet to the frame of the appliance with the ground screw using the same hole in the frame where the ground screw was originally installed (See Fig. 12).

5.Make sure all screws are tightened securely and replace the rear access cover (See Fig. 9).

Fig. 9

Fig. 10

Fig. 12

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Serial Plate Locations Installation Instructions for Freestanding Electric RangeImportant Notes to the Installer Important Note to the ConsumerAdditional Materials You Will Need Before StartingTools You Will Need For leveling legs and Anti-Tip Bracket For electrical supply connectionElectrical Connection to Range 2b. Models Requiring Power Supply Cord KIT4A. Power Cord Connections Wire Connection Instructions Refer toCarefully Slide Range Into Final Location 4c & 4-WIRE Permanent Wire ConnectionsAviso importante al consumidor Instrucciones DE Instalacion Para LA Estufa Electrica DEUbicación de la placa de serie Notas Importantes para el InstaladorMateriales adicionales que usted necesitará Instrucciones DE Instalacion Para Laestufa Electrica DEAntes DE Comenzar Para la conexión al suministro eléctricoConexiónTetrafilar Conexion Electrica a LA EstufaConexión permanente tetrafilar Solamente Conexión Trifilar

316454912 specifications

The Frigidaire 316454912 is a highly sought-after oven range component known for its durability and efficient performance. As an integral part of many Frigidaire stove models, this replacement oven igniter ensures that your cooking experience remains seamless and reliable.

One of the main features of the Frigidaire 316454912 is its universal compatibility with a variety of Frigidaire gas ranges. This makes it a versatile choice for users looking to replace a malfunctioning igniter. With dimensions that fit standard connectors, the igniter can be installed easily without requiring extensive modifications or tools, making it a convenient DIY solution for homeowners and cooks.

The Frigidaire 316454912 is designed with advanced technology that enhances its functionality. This igniter is made from high-quality materials that can withstand high temperatures and ensure longevity while providing reliable ignition every time. The component has been rigorously tested to ensure consistent performance—even in demanding cooking conditions—ensuring that your meals are cooked to perfection without the hassle of faulty ignition systems.

Another notable characteristic of the Frigidaire 316454912 is its ability to provide a safe cooking environment. The igniter efficiently ignites the gas burner, reducing the risk of gas build-up, which can lead to hazardous situations. This feature underscores Frigidaire's commitment to safety, making it an essential component in modern kitchen appliances.

The installation process of the Frigidaire 316454912 is user-friendly. Most individuals with basic handyman skills can install the igniter themselves, saving them time and money on professional repairs. Moreover, the overall design of the igniter ensures that it fits snugly within the range, reducing the possibility of leaks and ensuring optimal performance.

In conclusion, the Frigidaire 316454912 is a critical component for anyone looking to maintain or repair their Frigidaire gas range. With its compatibility, advanced safety features, and ease of installation, it stands out as an essential part of kitchen equipment. Whether you're a seasoned chef or a home cook, investing in a quality igniter like the Frigidaire 316454912 ensures that your cooking experience is both enjoyable and efficient.
Top Page Image Contents