Setting a
IMPORTANT
To start a
Setting a self-clean cycle
1.Be sure the clock displays the correct time of day.
2.Press start time. The " : " in the time of day will flash.
3. Press and hold the | pad to scroll to the time to start |
the delayed
4. Press clean.
5. Press the | or | pad once. “3:00” will appear in |
the display indicating that a 3 hour
once (2:00 appears in the display).
(Some models) For a 4 hour
6."CLn" will appear in the display during the
NOTE
As soon as the controls are set, the motor driven lock will begin to close automatically and the “LOCK” indicator light will flash. DO NOT open the oven door while the light is flashing (allow about 15 seconds for the oven door to lock).
SELF-CLEANING
When the self-clean cycle has completed:
1.The time of day will appear in the display window and the “Clean” and "LOCK" light will continue to glow.
2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
Stopping or interrupting a self-clean cycle
If it becomes necessary to stop or interrupt a self- cleaning cycle once it has been activated:
1.Press clear off.
2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has turned off, the oven door can be opened.
3.Restart the
CAUTION
To avoid possible burns use care when opening the oven door after the
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the self- cleaning cycle has completed. The oven may still be
VERYHOT.
NOTES
Whenever the
When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
21