Frigidaire 318203863 warranty Before Setting Oven Controls, Arranging Oven Racks, Oven Vent

Page 9

Before Setting Oven Controls

This range has a fan that will turn “ON” and “OFF” by itself to keep the electronics cool. It may continue to run after the range has been turned “OFF” but may also stop immediately to turn “ON” after a while.

Arranging Oven Racks

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use oven mitts when the oven is hot.

Oven Vent Location

The oven vent is located in the center rear on the cooktop. When the oven is on, warm air passes through the vent. This venting is necessary for proper air circulation in the oven and good baking results. DO NOT BLOCK OVEN VENT.

Never close off the openings with aluminum foil or any other material.

Removing and Replacing Oven Racks

To remove, pull the rack forward until it stops. Lift up front of rack and slide out. To replace, fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.

OVEN VENT

4

3

2

1

RECOMMENDED RACK POSITIONS FOR

BROILING, BAKING & ROASTING

Food

Rack position

 

 

 

Broiling meats, chicken or fish

3 or 4

 

 

 

Cookies, cakes, pies, biscuits &muffins

2 or 3

 

 

 

Frozen pies, angel food cake, yeast, bread,

1 or 2

casseroles, small cuts of meat or poultry

 

 

 

 

Turkey, roast or ham

1

 

 

 

Note: Always use caution when removing food.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Welcome Before Setting10-11 Before You CallQuestions? Welcome & CongratulationsVersión en español Register Your ProductImportant Safety Instructions For Your SafetyWhat to do if YOU Smell GAS Important Instructions for Usingyour Cooktop Conversion to Liquefied Petroleum Gas or L.P. Gas Features At a Glance Control Locations of the Gas Surface Burners Before Setting Surface ControlsRemember do not Allow SPILLS, Food 14K or 12K 5K 5K 16KSetting Proper Surface Burner Flame Size Setting Surface ControlsOperating the Gas Surface Controls Flame Size Type of CookingArranging Oven Racks Before Setting Oven ControlsRemoving and Replacing Oven Racks Oven VentUsing the Warm & Serve Drawer Setting Warm & Serve Drawer Controls some modelsAir Circulation in the Oven Arranging Warm & Serve Drawer Rack PositionsWarm & Serve Drawer Temperature Selection Setting Oven ControlsTo Set the Warm & Serve Drawer Controls Food ItemOven Baking Cooking InformationsBroiling Self-Cleaning Care & CleaningTo Set the Self-Clean Cycle Self-Cleaning OvenControl Panels Surfaces How to CleanEasier into the rack positions Oven DoorAllow SPILLS, FOOD, Cleaning Agents or ANY Other Material to Cleaning the Cooktop, Burner Heads, Caps & GratesHinge Slot Door re- moved from the oven Figure Removing and Replacing the Oven DoorLock in normal position To Remove Oven DoorTo Remove Warm & Serve Drawer Removing and Replacing Warm & Serve DrawerPlace When the Oven is in USE Adjusting Your Oven TemperatureChanging Oven Light To Remove the Hidden Bake Cover some modelsRange is not level Before you callEntire range or oven does not operate Surface burner flame burns half way aroundSoil not completely removed after self- cleaning cycle Self-cleaning cycle does not workSurface burner flame is orange Poor baking resultsExclusions This warranty does not cover the following Major Appliance Warranty Information

318203863 specifications

The Frigidaire 318203863 is a versatile and essential appliance component designed to enhance the efficiency and performance of various Frigidaire ranges and ovens. As a replacement oven burner, it plays a crucial role in delivering consistent heat for cooking a wide array of dishes. This component boasts several features and technologies that set it apart in the realm of kitchen appliances.

One of the most notable characteristics of the Frigidaire 318203863 is its compatibility. This oven burner is designed to fit a range of Frigidaire models, making it an ideal solution for homeowners looking to maintain or repair their cooking appliances. The ease of installation is another key feature; users can quickly replace their old burner without requiring professional assistance, saving both time and money.

The burner is constructed from durable materials that ensure longevity and resistance to wear and tear. This sturdy build is essential for any cooking appliance, as it must withstand high temperatures and frequent use. Additionally, the design of the burner ensures an even heat distribution, which is crucial for optimal cooking results. Even heat dispersion helps in achieving perfectly cooked dishes without burnt edges or undercooked centers.

In terms of technology, the Frigidaire 318203863 incorporates advancements that improve energy efficiency. This means that while it delivers high performance in terms of heat output, it also consumes less energy compared to older burner designs. This not only benefits the environment but also helps homeowners reduce their energy bills.

The versatility of the Frigidaire 318203863 allows users to prepare a wide range of meals, from simmering delicate sauces to searing steaks, all with consistent and reliable heat control. This adaptability is a fundamental aspect of modern cooking, catering to diverse culinary needs.

Lastly, the Frigidaire 318203863 exemplifies the brand’s dedication to quality and customer satisfaction. With a focus on performance, ease of use, and durability, it remains a popular choice among both amateur cooks and seasoned chefs. Embracing this replacement burner is a step towards maintaining a well-functioning kitchen capable of handling any culinary challenge.
Top Page Image Contents