Frigidaire 318203863 Removing and Replacing Warm & Serve Drawer, To Remove Warm & Serve Drawer

Page 18

Care & Cleaning

Removing and Replacing Warm & Serve Drawer

To Remove Warm & Serve Drawer:

1. Turn power off before removing the warm & Serve drawer.

2.Open the drawer to the fully opened position.

3.Locate glide lever on each side of drawer, pull up on the left glide lever and push down on the right glide lever (See Figure 1).

4.Pull the drawer away from the range.

To Replace Warm & Serve Drawer:

1.Pull the bearing glides to the front of the chassis glide (See Figure 2).

2.Align the glide on each side of the drawer with the glide slots on the range.

3.Push the drawer into the range until levers “click” (approximately 2”). Pull the drawer open again to seat bearing glides into position. If you do not hear the levers “click” or the bearing glides do not feel seated remove the drawer and repeat steps 1 thru 3. This will minimize possible damage to the bearing glides.

NOTE: The Warm & Serve Drawer will NOT operate while in the “Self-Clean” and “Oven Lockout” modes

Electrical Shock Hazard can occur and result in serious injury or death. Disconnect appliance from electric power before cleaning and servicing the warm & Serve drawer.

 

Latch

Left Glide

Pull up latch

with finger

 

Latch

 

Pull down latch

Right Glide

with finger

Figure 1

 

Bearing Glide

Figure 2

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 10-11 Before SettingWelcome Before You CallVersión en español Welcome & CongratulationsQuestions? Register Your ProductImportant Safety Instructions For Your SafetyWhat to do if YOU Smell GAS Important Instructions for Usingyour Cooktop Conversion to Liquefied Petroleum Gas or L.P. Gas Features At a Glance Remember do not Allow SPILLS, Food Before Setting Surface ControlsControl Locations of the Gas Surface Burners 14K or 12K 5K 5K 16KOperating the Gas Surface Controls Setting Surface ControlsSetting Proper Surface Burner Flame Size Flame Size Type of CookingRemoving and Replacing Oven Racks Before Setting Oven ControlsArranging Oven Racks Oven VentAir Circulation in the Oven Setting Warm & Serve Drawer Controls some modelsUsing the Warm & Serve Drawer Arranging Warm & Serve Drawer Rack PositionsTo Set the Warm & Serve Drawer Controls Setting Oven ControlsWarm & Serve Drawer Temperature Selection Food ItemCooking Informations Oven BakingBroiling To Set the Self-Clean Cycle Care & CleaningSelf-Cleaning Self-Cleaning OvenEasier into the rack positions Surfaces How to CleanControl Panels Oven DoorCleaning the Cooktop, Burner Heads, Caps & Grates Allow SPILLS, FOOD, Cleaning Agents or ANY Other Material toLock in normal position Removing and Replacing the Oven DoorHinge Slot Door re- moved from the oven Figure To Remove Oven DoorRemoving and Replacing Warm & Serve Drawer To Remove Warm & Serve DrawerChanging Oven Light Adjusting Your Oven TemperaturePlace When the Oven is in USE To Remove the Hidden Bake Cover some modelsEntire range or oven does not operate Before you callRange is not level Surface burner flame burns half way aroundSurface burner flame is orange Self-cleaning cycle does not workSoil not completely removed after self- cleaning cycle Poor baking resultsMajor Appliance Warranty Information Exclusions This warranty does not cover the following

318203863 specifications

The Frigidaire 318203863 is a versatile and essential appliance component designed to enhance the efficiency and performance of various Frigidaire ranges and ovens. As a replacement oven burner, it plays a crucial role in delivering consistent heat for cooking a wide array of dishes. This component boasts several features and technologies that set it apart in the realm of kitchen appliances.

One of the most notable characteristics of the Frigidaire 318203863 is its compatibility. This oven burner is designed to fit a range of Frigidaire models, making it an ideal solution for homeowners looking to maintain or repair their cooking appliances. The ease of installation is another key feature; users can quickly replace their old burner without requiring professional assistance, saving both time and money.

The burner is constructed from durable materials that ensure longevity and resistance to wear and tear. This sturdy build is essential for any cooking appliance, as it must withstand high temperatures and frequent use. Additionally, the design of the burner ensures an even heat distribution, which is crucial for optimal cooking results. Even heat dispersion helps in achieving perfectly cooked dishes without burnt edges or undercooked centers.

In terms of technology, the Frigidaire 318203863 incorporates advancements that improve energy efficiency. This means that while it delivers high performance in terms of heat output, it also consumes less energy compared to older burner designs. This not only benefits the environment but also helps homeowners reduce their energy bills.

The versatility of the Frigidaire 318203863 allows users to prepare a wide range of meals, from simmering delicate sauces to searing steaks, all with consistent and reliable heat control. This adaptability is a fundamental aspect of modern cooking, catering to diverse culinary needs.

Lastly, the Frigidaire 318203863 exemplifies the brand’s dedication to quality and customer satisfaction. With a focus on performance, ease of use, and durability, it remains a popular choice among both amateur cooks and seasoned chefs. Embracing this replacement burner is a step towards maintaining a well-functioning kitchen capable of handling any culinary challenge.
Top Page Image Contents