Frigidaire 318200198, CPEB27S9FC4 manual Consumer Defined Controls, Instructions Press Display

Consumer Defined Controls

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Silent Control Operation and Temperature Display features.

Setting Oven Lockout Feature

The _,_,_of!pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

prevents the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.

	INSTRUCTIONS		PRESS	DISPLAY
To activate the Oven Lockout feature
1.	Press and hold _,,_,_ for 3 seconds	(Figure 1).	_,,,,_ for 3 seconds
2. After 3 seconds "LOC" will appear, a beep will sound and
	"DOOR LOCKED" will flash in the display. Once the oven door			Figure	1
	is locked the "DOOR LOCKED" indicator will stop flashing and
	remain on along with the "LOC".
To reactivate normal oven operation:
1.	Press and hold _,,,a_ for 3 seconds.	A beep will sound. "LOC"	_[_,a,i_for°_!3 seconds	Figure	2

will disappear and "DOOR LOCKED" will flash in the display until the oven door has completely unlocked (figure 2).

2.The wall oven is again fully operational.

Setting Silent Control		Operation
The STARTTIME	_tari tinle	c_.,
	......
	d_d_pand,	CLEAN _,_o_,pads control the Silent Control operation feature.The Silent Control operation

feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS PRESS DISPLAY

To change control from normal sound operation to silent control operation

1.To tell if your range is set for normal or silent operation press

Start tilr_

and hold de ,d....._part • "0:00" will appear and "DELAY" will flash in the
display (Figure 3). After 7 seconds ":SP" will appear in the
display	(Figure 4).
	(:lean		dean	Figure 4
2. Press ,_,,o,_to, switch between normal sound operation and
silent operation mode. The display will show either ":SP" (Figure
4) or ":--" (Figure 5).
If ":SP" appears (Figure 4), the control will operate with normal				Figure 5
sounds and beeps. If ":- -" appears (Figure 5), the control is in
the silent operation mode.
3. Press	to accept the change or press	to reject	the
change.