Sherwood RD-6503 manual Playing Music Files, Stop mode, select the desired search mode, MP3

Page 26

PLAYING MUSIC FILES

•When connecting a USB mass storage device to this unit, you can enjoy MP3 or WMA files stored on it through this receiver.

•A total of 65536 folders and files can be supported.

Therefore, it is not possible to play folders and files that exceed the maximum limitations.

■MP3

•MP3 files must have a “.mp3” or “.MP3” file name extension.

•It is recommended that you record your material at a 44.1kHz sampling rate, using the 96~320 kbps data transfer rate.

•Fixed bit-rate files are recommended. Variable bit-rate(VBR) files are playable, but playing time may be displayed incorrectly.

■WMA

•WMA files must have a “.wma” or “.WMA” file name extension.

•It is recommended that you record your material at a bit rate of 64 kbps or higher.

•This unit cannot play files recorded with a bit rate of 80 and 256 kbps.

■Compatible USB mass storage device:

•USB flash memory(USB 2.0 or USB 1.1)

•USB flash players(USB 2.0 or USB 1.1)

•Memory cards(requires an additional card reader to work with this receiver)

■Supported formats:

• USB or memory file format FAT 16 or FAT 32.

■Notes :

•It is not possible to connect this unit to a PC for USB playback.

•We cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit.

•During USB playback, do not remove the USB device. Should this happen, it may be result in malfunction or cause damage to this unit and/or the USB device. To prevent it, after USB playback, remove the USB device in the stop mode or the standby mode.

ENGLISH

1. Select the USB IN as an input source.

2. Connect the USB device into the USB connector on the front panel.

Example) Folder search mode

■Notes :

•Depending on the file types, etc. it may take times to read the files stored on the USB device.

•When there are no MP3 or WMA files in a folder, "ROOT" will display as folder name, too.

3. In the stop mode, select the desired search mode.

Example) File search mode

•Each time this button is pressed, the search mode changes as follows :

→Folder search mode : To select the desired folder ("000 : ROOT", etc.)

→File search mode

: To select the desired file in the

("012 : TOTAL", etc.)

selected folder.

■Note :

•When it is in the stop mode, you can select the search mode.

27

Page 25 Page 27
Image 26
Page 25 Page 27
Contents RD-6503 Read this Before Operating Your Unit 220 240Contents Connecting Antennas System ConnectionsConnecting Video Components Connecting External INs Connecting Subwoofer PRE OUT Surround left and right speakers Speaker placementFront left and right speakers and center speaker SubwooferFront Panel Controls Fluorescent DisplayFront AUX Jack Remote Controls Remote Control Operation Range Loading BatteriesBefore operation OperationsListening to a Program Source When CD, Video 1~ 2 is selected as an input source Adjusting the tone bass and treble Surround Sound 2CH downmix mode When CD or Video 1 ~ 2 is selected as an input sourceTo cancel the surround mode for stereo playback Enjoying Surround SoundWhen selecting the DRC Dynamic Range Compression Night mode Listening in Virtual Surround Headphone modeWhen adjusting the sound parameters Press the Sound Parameter buttonEnter the test tone mode Repeat the above steps 2 and 3 to adjust other parametersAdjusting each channel level with test tone Cancel the test tone functionRepeat the above steps 2 and 3 to adjust each channel level Adjusting the current channel levelAdjust the level of the selected channel as desired Press the Channel Level buttonConfirm your selection Memorizing the adjusted channel levelsSelect the desired one of REF 1 and REF Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsManual presetting Tuning to preset stationsTP search Listening to RDS Broadcastsfm onlyRDS search PTY search FM mode, press the Search Mode button three timesWhen PTY Srch is displayed, select the desired program type MP3 Stop mode, select the desired search modePlaying Music Files Compatible USB mass storage deviceTo stop playback Select the desired folder or fileStart playback To interrupt playback temporarily Displaying file information during playback Skipping ahead or back during playbackRepeat/Random playback Dubbing from video components onto Video RecordingRecording with Tape Dubbing the audio and video signals separately onto Video Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the operation statusSystem Setup Turn the setup menu onSetup menu flow Setting the System When selecting the Subwoofer modeSetting the Input Press the Cursor UP/DOWN buttons to select the desired item When selecting the DigitalWhen selecting the Auto Surround Setting the Speaker Setup When selecting the Configuration About the speaker sizeWhen selecting the Distance About the speaker distanceWhen selecting the Crossover About the crossover frequencyRepeat the above steps 1 and 2 to adjust each channel level Setting the CH LevelAdjusting the current channel level Press the Cursor UP/DOWN buttons to select the Mode ~ Setting the Parameter When selecting the Night ModeWhen selecting the Dolby Plii Music Troubleshooting Guide Problem Possible Cause RemedySpecifications RD-6503

RD-6503 specifications

The Sherwood RD-6503 is a sophisticated audio receiver designed for the modern home theater enthusiast. With its blend of classic design and contemporary technology, the RD-6503 delivers a compelling audio experience that caters to both casual listeners and audiophiles alike.

One of the standout features of the RD-6503 is its robust power output. Capable of delivering 100 watts per channel into 8 ohms, this receiver ensures that your favorite movies and music come to life with richness and clarity. The amplification is backed by high-quality components that contribute to a cleaner sound with lower distortion levels. This design consideration makes the RD-6503 particularly effective at handling dynamic soundtracks, providing a punchy and captivating audio experience.

In terms of connectivity, the RD-6503 includes a variety of inputs and outputs. It is equipped with multiple HDMI inputs, allowing users to connect their Blu-ray players, gaming consoles, and other multimedia devices without hassle. The built-in HDMI switching also supports 4K video pass-through, making it a future-proof choice for home theater setups. Additionally, the receiver boasts USB and auxiliary inputs, as well as digital optical and coaxial connections, ensuring compatibility with a plethora of devices.

Sherwood has incorporated advanced audio technologies in the RD-6503, including Dolby Digital and DTS surround decoding. These features provide an immersive sound stage that enhances the listening experience, whether you're watching a blockbuster film or streaming music. Moreover, the RD-6503 supports a range of stereo and surround sound formats, enabling users to tailor their audio setup to their specific needs.

Another notable characteristic of the RD-6503 is its user-friendly interface. The intuitive on-screen display simplifies navigation of settings, making it easy to adjust sound modes, levels, and input sources. The included remote control further enhances convenience, providing access to all the receiver’s functionalities from the comfort of your seat.

In conclusion, the Sherwood RD-6503 is a versatile, high-performance audio receiver that combines powerful amplification with advanced connectivity options. Its support for modern surround sound formats and ease of use makes it an ideal choice for anyone looking to elevate their home entertainment experience. Whether you're hosting a movie night or enjoying your favorite playlist, the RD-6503 is designed to deliver stunning sound quality that exceeds expectations.
Top Page Image Contents