Sherwood RD-6503 manual When selecting the Configuration, About the speaker size

Page 38

When selecting the CONFIGURATION

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "CONFIG", then press the ENTER button.

ENGLISH

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker.

3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to set the selected speaker as desired.

•Depending on your speaker type, you can select one of these following speaker types.

L(Large): Select this when connecting speakers that can fully reproduce sounds below crossover frequency.

S(Small) : Select this when connecting speakers that can not fully reproduce sounds below crossover frequency. When this is selected, sounds below crossover frequency are sent to the subwoofer or speakers which are set to "L (Large)" (when not using a subwoofer)

N(None): Select this when no speakers are connected. When this is selected, sounds are sent to the speakers which are not set to "N (None)".

Y(Yes)/N(No): Select the desired depending on whether a subwoofer is connected or not.

■Notes :

•When speakers are set to "S (Small)", you should set their crossover frequency correctly according to their frequency characteristics. (For details, refer to "When selecting the CROSSOVER" on page 41.)

•When "SUB-W" is set to "N (No)", "FRONT" is automatically set to "L (Large)".

•When the "FRONT" is set to "S (Small)", "CENTER" and "SURR" cannot be set to "L (Large)".

4. Repeat the above steps 2 and 3 until the speakers are all set to the desired mode.

■About the speaker size

•Select "L (Large)" or "S (Small)" not according to the actual size of the speaker but according to the speaker's capacity for playing low frequency (bass sound below frequency set on the "X-OVER" menu) signals.

•If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.

39

Page 37 Page 39
Image 38
Page 37 Page 39
Contents RD-6503 Read this Before Operating Your Unit 220 240Contents Connecting Antennas System ConnectionsConnecting Video Components Connecting External INs Connecting Subwoofer PRE OUT Surround left and right speakers Speaker placementFront left and right speakers and center speaker SubwooferFront Panel Controls Fluorescent DisplayFront AUX Jack Remote Controls Remote Control Operation Range Loading BatteriesBefore operation OperationsListening to a Program Source When CD, Video 1~ 2 is selected as an input source Adjusting the tone bass and treble Surround Sound 2CH downmix mode When CD or Video 1 ~ 2 is selected as an input sourceTo cancel the surround mode for stereo playback Enjoying Surround SoundWhen selecting the DRC Dynamic Range Compression Night mode Listening in Virtual Surround Headphone modeWhen adjusting the sound parameters Press the Sound Parameter buttonEnter the test tone mode Repeat the above steps 2 and 3 to adjust other parametersAdjusting each channel level with test tone Cancel the test tone functionRepeat the above steps 2 and 3 to adjust each channel level Adjusting the current channel levelAdjust the level of the selected channel as desired Press the Channel Level buttonConfirm your selection Memorizing the adjusted channel levelsSelect the desired one of REF 1 and REF Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsManual presetting Tuning to preset stationsTP search Listening to RDS Broadcastsfm onlyRDS search PTY search FM mode, press the Search Mode button three timesWhen PTY Srch is displayed, select the desired program type MP3 Stop mode, select the desired search modePlaying Music Files Compatible USB mass storage deviceTo stop playback Select the desired folder or fileStart playback To interrupt playback temporarily Displaying file information during playback Skipping ahead or back during playbackRepeat/Random playback Dubbing from video components onto Video RecordingRecording with Tape Dubbing the audio and video signals separately onto Video Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the operation statusSystem Setup Turn the setup menu onSetup menu flow Setting the System When selecting the Subwoofer modeSetting the Input Press the Cursor UP/DOWN buttons to select the desired item When selecting the DigitalWhen selecting the Auto Surround Setting the Speaker Setup When selecting the Configuration About the speaker sizeWhen selecting the Distance About the speaker distanceWhen selecting the Crossover About the crossover frequencyRepeat the above steps 1 and 2 to adjust each channel level Setting the CH LevelAdjusting the current channel level Press the Cursor UP/DOWN buttons to select the Mode ~ Setting the Parameter When selecting the Night ModeWhen selecting the Dolby Plii Music Troubleshooting Guide Problem Possible Cause RemedySpecifications RD-6503

RD-6503 specifications

The Sherwood RD-6503 is a sophisticated audio receiver designed for the modern home theater enthusiast. With its blend of classic design and contemporary technology, the RD-6503 delivers a compelling audio experience that caters to both casual listeners and audiophiles alike.

One of the standout features of the RD-6503 is its robust power output. Capable of delivering 100 watts per channel into 8 ohms, this receiver ensures that your favorite movies and music come to life with richness and clarity. The amplification is backed by high-quality components that contribute to a cleaner sound with lower distortion levels. This design consideration makes the RD-6503 particularly effective at handling dynamic soundtracks, providing a punchy and captivating audio experience.

In terms of connectivity, the RD-6503 includes a variety of inputs and outputs. It is equipped with multiple HDMI inputs, allowing users to connect their Blu-ray players, gaming consoles, and other multimedia devices without hassle. The built-in HDMI switching also supports 4K video pass-through, making it a future-proof choice for home theater setups. Additionally, the receiver boasts USB and auxiliary inputs, as well as digital optical and coaxial connections, ensuring compatibility with a plethora of devices.

Sherwood has incorporated advanced audio technologies in the RD-6503, including Dolby Digital and DTS surround decoding. These features provide an immersive sound stage that enhances the listening experience, whether you're watching a blockbuster film or streaming music. Moreover, the RD-6503 supports a range of stereo and surround sound formats, enabling users to tailor their audio setup to their specific needs.

Another notable characteristic of the RD-6503 is its user-friendly interface. The intuitive on-screen display simplifies navigation of settings, making it easy to adjust sound modes, levels, and input sources. The included remote control further enhances convenience, providing access to all the receiver’s functionalities from the comfort of your seat.

In conclusion, the Sherwood RD-6503 is a versatile, high-performance audio receiver that combines powerful amplification with advanced connectivity options. Its support for modern surround sound formats and ease of use makes it an ideal choice for anyone looking to elevate their home entertainment experience. Whether you're hosting a movie night or enjoying your favorite playlist, the RD-6503 is designed to deliver stunning sound quality that exceeds expectations.
Top Page Image Contents