Sherwood RD-6503 manual Troubleshooting Guide, Problem Possible Cause Remedy

Page 45

Troubleshooting Guide

If a fault occurs, run through the table below before taking your receiver for repair.

If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty.

ENGLISH

 

 

 

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

 

 

 

No power

• The AC input cord is disconnected.

• Connect the cord securely.

 

 

• Poor connection at AC wall outlet or the

• Check the outlet using a lamp or another

 

 

outlet is inactive.

appliance.

 

 

 

 

 

No sound

• The speaker cords are disconnected.

• Check the speaker connections.

 

 

• The master volume is adjusted too low.

• Adjust the master volume.

 

 

• The MUTE button on the remote control is

• Press the MUTE button to cancel the

 

 

pressed to ON.

muting effect.

 

 

• Speakers are not switched on.

• Press the SPEAKER button to ON.

 

 

• Incorrect selection of the input source.

• Select the desired input source correctly.

 

 

• Incorrect connections between the

• Make connections correctly.

 

 

components.

 

 

 

 

 

 

No sound from the surround

• Surround mode is switched off(stereo

• Select a surround mode.

 

speakers

mode).

 

 

 

• Master volume and surround level are too

• Adjust master volume and surround level.

 

 

low.

 

 

 

• A monaural source is used.

• Select a stereo or surround source.

 

 

• Surround speaker setting is “N”.

• Select the desired surround speaker

 

 

 

setting.

 

 

 

 

 

No sound from the center

• Surround mode is switched off(stereo

• Select the desired surround.

 

speaker

mode).

 

 

 

• Center speaker setting is “N”.

• Select the desired center speaker setting.

 

 

• Master volume and center level are too low.

• Adjust master volume and center level.

 

 

 

 

 

Stations cannot be received

• No antenna is connected.

• Connect an antenna.

 

 

• The desired station frequency is not tuned

• Tune in the desired station frequency.

 

 

in.

 

 

 

• The antenna is in wrong position.

• Move the antenna and retry tuning.

 

 

 

 

 

Preset stations cannot be

• An incorrect station frequency has been

• Memorize the correct station frequency.

 

received

memorized.

 

 

 

• The memorized stations are cleared.

• Memorize the stations again.

 

 

 

 

 

Poor FM reception

• No antenna is connected.

• Connect an antenna.

 

 

• The antenna is not positioned for the best

• Change the position of the antenna.

 

 

reception.

 

 

 

 

 

 

Continuous hissing noise

• Weak signals.

• Change the position of the antenna.

 

during FM reception,

 

• Install an outdoor FM antenna.

 

especially when a stereo

 

 

 

broadcast is received.

 

 

 

 

 

 

 

Continuous or intermittent

• Noise is caused by motors, fluorescent

• Keep the receiver away from noise

 

hissing noise during AM

lamps or lightning, etc.

sources.

 

reception, especially at night.

 

• Install an outdoor AM antenna.

 

 

 

 

 

Remote control unit does not

• Batteries are not loaded or exhausted.

• Replace the batteries.

 

operate.

• The remote sensor is obstructed.

• Remove the obstacle.

 

 

 

 

46

Page 44 Page 46
Image 45
Page 44 Page 46
Contents RD-6503 220 240 Read this Before Operating Your UnitContents System Connections Connecting AntennasConnecting Video Components Connecting External INs Connecting Subwoofer PRE OUT Front left and right speakers and center speaker Speaker placementSurround left and right speakers SubwooferFluorescent Display Front Panel ControlsFront AUX Jack Remote Controls Loading Batteries Remote Control Operation RangeOperations Listening to a Program SourceBefore operation When CD, Video 1~ 2 is selected as an input source Adjusting the tone bass and treble Surround Sound To cancel the surround mode for stereo playback When CD or Video 1 ~ 2 is selected as an input source2CH downmix mode Enjoying Surround SoundWhen adjusting the sound parameters Listening in Virtual Surround Headphone modeWhen selecting the DRC Dynamic Range Compression Night mode Press the Sound Parameter buttonAdjusting each channel level with test tone Repeat the above steps 2 and 3 to adjust other parametersEnter the test tone mode Cancel the test tone functionAdjust the level of the selected channel as desired Adjusting the current channel levelRepeat the above steps 2 and 3 to adjust each channel level Press the Channel Level buttonSelect the desired one of REF 1 and REF Memorizing the adjusted channel levelsConfirm your selection Recalling the memorized channel levelsManual tuning Auto tuningAuto presetting Listening to Radio BroadcastsTuning to preset stations Manual presettingListening to RDS Broadcastsfm only RDS searchTP search FM mode, press the Search Mode button three times When PTY Srch is displayed, select the desired program typePTY search Playing Music Files Stop mode, select the desired search modeMP3 Compatible USB mass storage deviceSelect the desired folder or file Start playback To interrupt playback temporarilyTo stop playback Skipping ahead or back during playback Repeat/Random playbackDisplaying file information during playback Recording Recording with TapeDubbing from video components onto Video Dubbing the audio and video signals separately onto Video Adjusting the brightness of the fluorescent display Operating the sleep timerOther Functions Displaying the operation statusTurn the setup menu on System SetupSetup menu flow When selecting the Subwoofer mode Setting the SystemSetting the Input When selecting the Digital When selecting the Auto SurroundPress the Cursor UP/DOWN buttons to select the desired item Setting the Speaker Setup About the speaker size When selecting the ConfigurationAbout the speaker distance When selecting the DistanceAbout the crossover frequency When selecting the CrossoverSetting the CH Level Adjusting the current channel levelRepeat the above steps 1 and 2 to adjust each channel level Press the Cursor UP/DOWN buttons to select the Mode ~ When selecting the Night Mode Setting the ParameterWhen selecting the Dolby Plii Music Problem Possible Cause Remedy Troubleshooting GuideSpecifications RD-6503

RD-6503 specifications

The Sherwood RD-6503 is a sophisticated audio receiver designed for the modern home theater enthusiast. With its blend of classic design and contemporary technology, the RD-6503 delivers a compelling audio experience that caters to both casual listeners and audiophiles alike.

One of the standout features of the RD-6503 is its robust power output. Capable of delivering 100 watts per channel into 8 ohms, this receiver ensures that your favorite movies and music come to life with richness and clarity. The amplification is backed by high-quality components that contribute to a cleaner sound with lower distortion levels. This design consideration makes the RD-6503 particularly effective at handling dynamic soundtracks, providing a punchy and captivating audio experience.

In terms of connectivity, the RD-6503 includes a variety of inputs and outputs. It is equipped with multiple HDMI inputs, allowing users to connect their Blu-ray players, gaming consoles, and other multimedia devices without hassle. The built-in HDMI switching also supports 4K video pass-through, making it a future-proof choice for home theater setups. Additionally, the receiver boasts USB and auxiliary inputs, as well as digital optical and coaxial connections, ensuring compatibility with a plethora of devices.

Sherwood has incorporated advanced audio technologies in the RD-6503, including Dolby Digital and DTS surround decoding. These features provide an immersive sound stage that enhances the listening experience, whether you're watching a blockbuster film or streaming music. Moreover, the RD-6503 supports a range of stereo and surround sound formats, enabling users to tailor their audio setup to their specific needs.

Another notable characteristic of the RD-6503 is its user-friendly interface. The intuitive on-screen display simplifies navigation of settings, making it easy to adjust sound modes, levels, and input sources. The included remote control further enhances convenience, providing access to all the receiver’s functionalities from the comfort of your seat.

In conclusion, the Sherwood RD-6503 is a versatile, high-performance audio receiver that combines powerful amplification with advanced connectivity options. Its support for modern surround sound formats and ease of use makes it an ideal choice for anyone looking to elevate their home entertainment experience. Whether you're hosting a movie night or enjoying your favorite playlist, the RD-6503 is designed to deliver stunning sound quality that exceeds expectations.
Top Page Image Contents