Frigidaire 318200404 manual HOT Surface Indicator Light, Things to Remember

Page 13

Ceramic Glass Cooktop (some models) (continued)

 

HOT SURFACE INDICATOR LIGHT

Indicator

(some models)

Light

 

 

Some models have an indicator light located on the ceramic glass cooktop that glows

 

as soon as the glass begins to warm up. When the heating unit is turned off, it will

 

continue to glow as long as the glass remains warm enough to cause burns. Other

 

models have 4 hot surface indicators (one per element) arranged in a cluster. Their

 

location is as shown in the illustration above.

 

 

SPECIAL CAUTION FOR ALUMINUM FOIL

AND ALUMINUM COOKING UTENSILS

1)Aluminum foil

Use of aluminum foil will damage the cooktop. Do not use under any circumstances.

2)Aluminum utensils

The melting point of aluminum being much lower than that of other metals, care must be taken when aluminum pots or pans are used. If allowed to boil dry, not only will the utensil be ruined, but also permanent damage in the form of breakage, fusing or marking may affect the ceramic glass surface.

THINGS TO REMEMBER

1.AVOID using bleach and don’t use ammonia to clean the ceramic surface.

2.Do not put plastic items on warm cooking areas.

3.Never slide oven racks across cooktop surface. They may scratch or metalmark the cooktop.

4.If cooktop should break, do not use cooktop or attempt to clean it. Call your authorized service technician immediately.

5.Never use a trivet or metal stand between the cooking utensil and the ceramic cooktop. The ceramic surface may be scratched, metal marked or etched by such items.

6.Sugary spills can cause pitting of your cooktop surface. Therefore, you must begin cleaning the spills while the cooktop is still hot. Use caution when following the steps below.

a)Turn off all surface units and remove all pans immediately.

b)Wearing an oven mitt, use a razor blade scraper to scrape the hot spill out of the cooking zone to a cooler area on the cooktop.

c)Allow the cooktop to cool.

USE AND CARE OF GLASS SURFACE

Problem

Cause

To Prevent

To Remove

 

 

 

 

Fine ”brown

Coarse particles (salt,

Clean cooktop after

Tiny scratches are not removable.

lines“ (tiny

sand, sugar or grit)

every use.

They can be minimized by

scratches or

between bottom of

 

continual use of cleaner cream.

abrasions which

cookware and cooktop

 

Such scratches do not affect

have collected

that are not removed

 

cooking.

soil)

before cooking.

 

 

 

Using incorrect cleaning

Daily use of cleaner

 

 

materials.

cream.

 

 

 

 

 

Metal marking

Sliding or scraping

Do not slide cookware

Apply cleaner cream

(mark or black

metal utensils or oven

across cooktop.

with dampened paper

marks).

shelves across cooktop.

 

towel to a cooled surface.

 

 

 

 

Brown streaks

Cleaning with a

Use cleaner cream

Use a small amount of cleaner

and specks.

sponge or dishcloth

with clean, damp paper

cream with clean, damp paper

 

that has been used

towel.

towel.

 

for other kitchen tasks.

 

 

 

 

 

 

NOTE: Due to the high intensity of heat generated by the surface elements, the glass surface will turn green when the element will be turned off. This phenomenon is normal and the glass will come back to its original white color after it has completely cooled down. (White glass cooktops only).

General 11 Information

Image 13
Contents Electric Ranges N e r ’ s I d e Warranty Applies to Frigidaire Parts and ServiceWarranty does not Apply to WarrantorN e r a l I n f o r m a t i o n Do not Touch Surface UNITS, Areas Near These Important Instructions for UsingImportant Instructions for Using Your Oven Important Instructions for Cleaning Your RangeSELF-CLEANING Ovens Your CooktopClearances and Dimensions Installation InstructionsLocation LevelingSurface Light Oven LightElements are Cool Circuit Protection Setting Surface ControlsSelecting Surface Cooking Utensils GoodAir Circulation in the Oven Convection Roasting some modelsConvection Cooking Convection notesBaking Problems and Solutions Chart Indicator LightOven Baking Broiling Oven SettingsTypes of Heating Units Used Ceramic Glass Cooktop some modelsSpecial Caution for Aluminum Foil Aluminum Cooking Utensils HOT Surface Indicator LightThings to Remember USE and Care of Glass SurfaceDo USE on Ceramic Glass Cooktop Cleaning Materials for Ceramic Glass CooktopDo not USE on Ceramic Glass Cooktop Surfaces Cleaning Agents Instructions Cleaning the ApplianceControl Panel Coil Surface Elements some modelsPorcelain Enamel Cooktop Cleaning Porcelain enamel cooktop cleaning instructionsDaily Cleaning Cleaning the Self-Clean Oven some models Cleaning the Regular Oven Non self-clean ovenPreparing the Oven for Self-Cleaning Adhere to the following cleaning precautionsSetting the Controls for a Clean Cycle What to Expect During CleaningTo Remove and Replace the Oven Door Automatic Lock OFF of the Surface ElementsTo Remove/Replace Storage Drawer Removable Outer Door Glass Panel some modelsTo remove the external door glass panel To replace the external door panelStaple or clip original invoice here Problem Possible Cause / Solution InstallationRange does not Operate Surface Units Range does not OperatePoor Baking Results Avoid Transportation Damage to Your Range BroilingSetting Warmer Drawer Controls To Remove Warmer Drawer General CleaningTo Replace Warmer Drawer Cuisinières Électriques Guide de ’utilisateur Garant Frigidaire Pièces ET ServiceLA Garantie Sapplique LA Garantie NE Sapplique PASF o r m a t i o n s g é n é r a l e s Importantes Mesures DE Sécurité Instructions Importantes Pour L’UTILISATION DE Votre Four Pour Surface DE Cuisson Vitrocéramique SeulementConservez CES Instructions Fours AutonettoyantsEmplacement Espaces prévus et dimensionsNivellement VUE DE ’AVANT CôtéLampe DE Surface Installée Instructions d’installation suiteLampe du four Certain modèles Pour mettre la cuisinière de niveauBON Coupe-circuit de protectionMauvais Réglage Type de cuissonCirculation d’air dans le four Rôtissage par convection certains modèlesCuisson par convection Option disponible avec certains modèlesCuisson au four Voyants lumineuxRéglage du four Cuisson au grilTypes DE Foyers Utilisés Surface de cuisson vitrocéramique certains modèlesVoyant Avertisseur DE Surface Chaude Surface de cuisson vitrocéramique certains modèles suitePoints À SE Rappeler Entretien DE LA Surface DE CuissonComment Nettoyer LA Surface DE Cuisson Vitrocéramique Certains modèles suiteNE PAS Utiliser SUR LA Surface DE Cuisson Vitrocéramique AvertissementNettoyage de l’appareil Tableau des commandesNettoyage extérieur Surface de cuisson à foyers spiralés certains modèlesNettoyage DE LA Surface DE Cuisson EN Émail Vitrifié Nettoyage de l’appareil suiteNettoyage Quotidien Nettoyage du four autonettoyant certains modèles Nettoyage du four régulier four non autonettoyantPréparation du four avant l’autonettoyage Prenez les précautions de nettoyage qui suiventRéglage des commandes du four Enlever et réinstaller la porteCe qui peut survenir durant l’autonettoyage Table de cuisson levable certains modèlesPorte avec vitre extérieure démontable certains modèles Pour réinstaller la vitre extérieure de la porteRetirer/replacer le tiroir de rangement Pour retirer la vitre extérieure de la porteBrocher ici votre facture LA Cuisinière NE Fonctionne PAS Problèmecause Possible / SolutionSurface DE Cuisson LA Cuisinière NE Fonctionne PAS suiteMauvais Résultats DE Cuisson AU Four Cuisson AU Gril Problème Cause Possible / SolutionÉvitez D’ENDOMMAGER L’APPAREIL Durant SON Transport Réglage des Commandes duTiroir-réchaud Nettoyage général Suite

318200404 specifications

The Frigidaire 318200404 is a high-quality replacement oven igniter designed to enhance the functionality and reliability of gas appliances. Its design ensures that it ignites the gas burner effectively, delivering consistent performance vital for cooking and baking. This igniter is primarily used in various Frigidaire gas ranges and ovens, making it an essential component for maintaining optimal cooking conditions.

One of the main features of the Frigidaire 318200404 is its durable construction. Made from high-temperature resistant materials, it can withstand the intense heat produced in the oven, ensuring longevity and reliability. This durability is crucial, as igniters are subjected to thermal stress during regular use. Additionally, the Frigidaire igniter is designed to provide a stable ignition source, minimizing the risk of gas build-up, which can occur if the igniter fails to activate promptly.

The technology behind the Frigidaire 318200404 involves a ceramic insulator combined with a metal filament. This combination allows for efficient heat generation, resulting in a quicker and more reliable ignition process. The igniter is engineered to provide a slow build-up of heat, which is ideal for igniting larger burners, ensuring that meals cook evenly and reduce the likelihood of burning.

Another characteristic of the Frigidaire 318200404 is its ease of installation. It typically features a straightforward plug-in design that allows homeowners and technicians to replace faulty igniters with minimal tools and effort. This ease of replacement reduces downtime for ovens and ensures that cooking appliances remain functional with little disruption to the household routine.

Moreover, the 318200404 igniter is compatible with various Frigidaire models, making it a versatile choice for many users. Proper maintenance of the oven igniter is crucial, as regular inspections can prevent significant issues and extend the lifespan of the appliance.

In summary, the Frigidaire 318200404 is a reliable and efficient igniter that plays an essential role in gas cooking appliances. Its durable construction, advanced technology, and easy installation make it an ideal choice for homeowners looking to maintain the performance of their ovens and ranges. Proper attention to the igniter can significantly enhance the overall cooking experience.