Frigidaire A, B manual To Start the Self-Clean Cycle, To Set the Controls for a Self-Clean Cycle

Page 22

Setting OVEN controls - Models B & C

Self-cleaning

To Start the Self-Clean Cycle

*We recommend a 2 hour self-clean cycle for light soils, and a 3 hour cycle for average to heavy soils (to assure satisfactory results).

To Set the Controls for a Self-Clean Cycle:

1.Be sure the clock shows the correct time of day.

2.Push the CLEAN pad. "- - -" appears in the display.

3.Push the UP ARROW pad until "3:00" appears in the display for a 3 hour cycle, or push the DOWN ARROW pad until "2:00" appears in the display for a 2 hour cycle.

4.As soon as the UP or DOWN ARROW pad is released, "CLn" appears in the display.

5.As soon as the controls are set, the motor driven lock will begin to close automatically and the "Door

Locked" indicator light will flash. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

6.The "Door Locked" light will glow until the cleaning cycle is completed or cancelled, and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1.The time of day will appear in the display window and the "Door Locked" light will continue to glow.

2.Once the oven has cooled down for about 1 hour and the "Door Locked" light has gone out, the oven door can be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self- cleaning cycle due to excessive smoke or fire:

1.Push the CLEAR OFF pad.

2.Once the oven has cooled down for about 1 hour and the "Door Locked" light has gone out, the oven door can be opened.

3.Correct the condition which caused the smoking.

4.Restart the self-clean cycle once all conditions have been corrected.

CAUTION

Use care when opening the oven door after self-clean- ing cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self-cleaning cycle is com- pleted. The oven may still be VERY HOT.

Failure Modes

All failure modes give a visual and audible alarm. When display shows F10 (temperature runaway), F30 (oven sensor circuit fault) or F90 (motor door lock fault), the electronic oven control has detected a fault condition. Note that code and push the CLEAR OFF pad to clean the display and stop the beeping. Reprogram the oven. If fault recurs, push CLEAR OFF pad, disconnect the appliance to prevent damage and contact an authorized servicer.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Use &Care Serial Plate Location Welcome & CongratulationsProduct Registration Register Your ProductImportant Safety Instructions DefinitionsDo not Touch Surface UNITS, Areas Near Important Instructions for Using Your cooktopDo Not Use Decorative Surface Burner Covers For Self-CLEANING Oven For Cooktops with Coil Elements onlyFeatures AT a Glance mODEL a Your built-in range FeaturesFeatures AT a Glance mODEL B Features AT a Glance mODEL C Cookware Material types Selecting Surface Cooking CookwareCorrectincorrect Specialty Pans & Trivets Canning Tips & InformationAbout the Radiant Surface Elements Before Setting Surface ControlsCeramic Glass Cooktop some models Types of the heating elements usedElement on all models Hot surface indicator lightElement on indicator light location Model C onlyOperating the Surface Elements Setting surface controlsSurface cooking settings All models To Operate the Surface ElementsAir circulation in the oven Oven Vent LocationArranging oven racks Recommended rack positionsTo Change the Temperature Display Mode Setting Oven controls Model aControl pad features To Set the Minute TimerTo Broil To Set or Change the Temperature for BakingAdjusting Your Oven Temperature Failure ModesOven can be programmed to Setting Oven controls ModelS B & CFor a silent control panel To Set Control for Continuous Bake or 12 Hour Energy Saving Push Timer ON/OFF padTo Set Control for Oven Lockout feature To Set Control for Oven LockoutTo Set the Controls for Normal Baking To Set or Change the Temperature for Normal BakingSetting Broil Broiling TipsWhen the Set Bake Time Runs Out To Set the Bake Time FeatureRecalibrating Your Oven Temperature To Adjust Oven TemperatureAdhere to the following cleaning precautions Self-cleaningWhat to Expect during Cleaning To Set the Controls for a Self-Clean Cycle To Start the Self-Clean CycleWhen the Self-Clean Cycle is Completed Care & Cleaning Cleaning Chart Cleaning various parts of your applianceTo Raise the Top for Cleaning Care & CleaningCoil Elements Cooktop Cleaning Maintenance Porcelain enamel cooktop cleaning instructions some modelsFor heavy, burned-on soil For sugary spilloversFor heavy, burned on soil For light to moderate soilAluminum utensils Special door care instructions Most Care and cleaning of stainless steelRemoving and replacing the lift-off oven door Changing oven lightCleaning the Regular Oven non self To remove and replace storageBefore you call Solutions to Common Problems Oven baking Before you call Solutions to Common Problems Occurrence Possible CAUSE/SOLUTIONScratches or Self-cleaning cycleSoil not completely removed after self- cleaning cycle Abrasions onExclusions This warranty does not cover the following Disclaimer of Implies Warranties Limitation of Remedies

B, A, C specifications

Frigidaire, a renowned name in the home appliance industry, stands out with its innovative approach to refrigeration, particularly with its C, B, and A series refrigerators. These models cater to various consumer needs while incorporating advanced technologies and features designed to enhance efficiency and convenience.

The Frigidaire C series is recognized for its sleek design and user-friendly interface. Key features include adjustable shelves, which provide flexibility in organizing food items, and a spacious freezer compartment that offers ample storage for frozen goods. The C series also integrates the PureAir filter, ensuring that the refrigerator maintains a clean and fresh environment, effectively reducing odors. Moreover, this series often includes energy-efficient options that comply with modern energy standards, helping consumers save on electricity bills while being more eco-friendly.

Moving up to the B series, consumers experience a blend of style and enhanced functionality. This series includes smart technologies that allow users to control and monitor their refrigerator settings remotely via a smartphone app. The B series also features advanced cooling technologies that maintain optimal temperatures, thereby prolonging the freshness of food items. Another notable characteristic is the presence of ice makers and water dispensers, which provide convenient access to chilled water and ice, making it an excellent choice for families and gatherings.

Finally, the A series represents Frigidaire's high-end offering, boasting premium features and cutting-edge technology. This series often comes equipped with features like smart diagnostics, which identify potential issues before they become major problems. The A series also tends to feature adjustable temperature zones, allowing users to customize settings based on specific food storage needs. With its robust build and stylish finish, the A series doesn't just perform well; it enhances the visual appeal of modern kitchens.

Overall, Frigidaire C, B, and A series refrigerators provide a range of options tailored to different lifestyle needs. With their focus on efficiency, smart technology, and user convenience, these models continue to solidify Frigidaire's reputation as a leader in the refrigeration market. Whether one seeks the basic functionality of the C series or the advanced features of the A series, Frigidaire offers a refrigerator to meet every household's needs.
Top Page Image Contents