Sherwood R-925 operating instructions Operations, When the AUX/TV is selected as input source

Page 10

ENGLISH

Operations

Note : In the United States, the R-925 is shipped with a Universal Illuminated Pre-programmed Remote Control(RNC-100). When using this manual for instructions that require pressing buttons on the remote control, it will be necessary to press different buttons than those shown here.

Please see the owner`s manual supplied with the remote for the corresponding buttons.

LISTENING TO A PROGRAM SOURCE

Turn the power on.

1

 

or

 

POWER

POWER

or

 

 

 

 

 

 

CD

TUNER

 

 

FUNC

 

 

TAPE1

TAPE2

 

 

 

MON

 

 

DVD

PHONO

 

 

VCR1

AUX/TV

 

 

 

LDP

Each time the POWER button is pressed, the receiver is turned on to enter the operating mode or off to enter the standby mode.

In the standby mode, if the INPUT SELECTOR button is pressed on the remote control, the receiver is turned on automatically and the desired input is selected.

In the standby mode, the STANDBY indicator lights up. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the memorized contents and operation readiness.

Switch the speakers on.

2

SPEAKER

ON/OFF

Then sound can be heard from the speakers connected to the speaker terminals.

When using the headphone for private listening, press the SPEAKER switch again to switch the speakers off.

Select the desired input source.

3

T.2 MONITOR

 

 

CD

TUNER

 

 

FUNC

INPUT SELECTOR/

 

TAPE1

TAPE2

or

 

MON

INDEX

 

 

 

 

DVD

PHONO

 

 

 

 

VCR1

AUX/TV

 

 

 

LDP

Each time the INPUT SELECTOR/INDEX knob is rotated, the input source changes as follows :

PHONO

TUNER

CD PLAYER

TAPE 1

(frequency display)

 

AUX/TV

VCR1

LD PLAYER

DVD

When the TAPE 2 MONITOR button is set to on so that TAPE 2M indicator lights up, other inputs can not be heard from the speakers.

To listen to a input source other than TAPE 2 MONITOR, be sure to set the TAPE 2 MONITOR button to off.

TAPE 2 MONITOR function

You can connect either a tape deck or a graphic equalizer to the receiver s TAPE 2 MONITOR jacks. Only when you listen to the component connected to these jacks, set the TAPE 2 MONITOR button to on. If you connect a 3-head tape deck, you can listen to the sound being recorded during recording, not the source sound.

For further details, refer to the operating instructions of the component connected.

When the AUX/TV is selected as input source

Select the front AUX/VIDEO or the rear TV/AUX.

AUX SEL

FRONT

If the front AUX/VIDEO is selected, the FRONT AUX indicator lights up.

10

Image 10
Contents 925 Unpacking and Installation IntroductionRead this Before Operating Your Unit AC Voltage SelectionConnecting Audio Components Connecting AntennasConnecting Video Components System ConnectionsConnecting Digital Inputs Connecting MULTI- Room AdaptorConnecting System Control Connecting Speakers Switched AC Outlet AC Input CordFront Panel Controls Fluorescent Display AUX/VIDEO Input JacksDigi Link III System Remote controls Sleep Button Power Button CD Player SectionRemote Control Operation Range Loading BatteriesWhen the AUX/TV is selected as input source OperationsWhen CD, DVD, LDP or AUX/TV is Selected as input sourceSurround Sounds Delay timeSurround modes Speaker placement Enjoying Surround SoundsAdjusting the speaker settings Checking the speaker settingChurch Mode Dolby Digitalac -3, Dolby Pro Logic or Dolby 3 Stereo modeTHEATER, HALL, Stadium or Auto tuning Manual tuningFrequency direct tuning Listening to Radio BroadcastsScanning preset stations in sequence Presetting radio stationsTuning to preset stations Listening to FM stereo broadcastsAudio Recording Recording with Tape Recording with Tape 2 MonitorListening to other audio inputs during Recording with VCR1Dubbing Video signals separately Dubbing and enjoying the audioOther Functions Compressing the dynamic range Dolby DIGITALAC-3 mode onlyOperating the sleep timer Checking the brightness of the fluorescent displaysRectifying or clearing a video label Entering video labelsChecking the video components connected Troubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier Section925

R-925 specifications

The Sherwood R-925 is a versatile and robust receiver that has made a significant impact in the home audio market. Known for its excellent performance and reliable build quality, it appeals to both audiophiles and casual listeners alike. The R-925, a part of Sherwood’s esteemed lineup, has been designed to deliver high-fidelity sound, along with multiple modern features that enhance the listening experience.

At its core, the Sherwood R-925 boasts a powerful amplifier section. The unit is equipped with a capable output power rating, allowing it to drive a wide range of speakers efficiently. Users can expect clear, dynamic sound reproduction across various genres, from classical to rock. To make the most of its power, the receiver features a robust power supply and high-quality components that reduce distortion and promote clean audio signals.

One of the standout features of the R-925 is its built-in radio tuner. With compatibility for both AM and FM bands, listeners can easily access a plethora of radio stations. The tuner is designed to provide sharp reception and clarity, with presets allowing users to save their favorite stations for easy access.

The R-925 also includes multiple audio inputs, supporting various sources such as CD players, turntables, and streaming devices. This flexibility allows users to integrate the receiver into their existing audio systems seamlessly. Additionally, the receiver features sound-enhancing technologies, such as a sophisticated equalizer that enables users to fine-tune their audio output to match personal preferences or room acoustics.

Another noteworthy characteristic is the user-friendly interface. The R-925 is equipped with a well-organized front panel with ergonomic controls, allowing for easy navigation through options and settings. This intuitive design is coupled with a clear LED display that provides visual feedback on the currently selected source and audio settings.

Incorporating high build quality with a classic aesthetic, the Sherwood R-925 fits neatly into any home setup. It is designed to blend style and functionality, making it a popular choice among home audio enthusiasts. Overall, the Sherwood R-925 offers a compelling package that combines powerful performance, modern features, and user-friendly operation, establishing itself as a worthy contender in the world of audio receivers.