Digi Link III System Remote controls

ENGLISH

DIGI LINK III System Remote controls

Note : In the United States, the R-925 is shipped with a Universal Illuminated Pre-programmed Remote Control(RNC-100). When using this manual for instructions that require pressing buttons on the remote control, it will be necessary to press different buttons than those shown here.

Please see the owner`s manual supplied with the remote for the corresponding buttons.

You can remotely control not only this receiver but also Sherwood compatible components bearing the DIGI LINK or logo.

For system remote control operation, first make the DIGI LINK connections.

SLEEP BUTTON

POWER BUTTON

■CD PLAYER SECTION

DISC(CD changer only) – for disc selection

– to begin play

– for pausing play

– to stop play or to clear a program

, – for skipping backward or forward REPEAT A < > B – to play a specific passage

repeatedly

INTRO SCAN – to preview each track only for 10 sec

INPUT SELECTOR BUTTONS In the standby mode, when pressing a input selector button, the unit is turned on automatically and the desired input source is selected.

SURROUND MODE BUTTON

DELAY TIME BUTTON

MASTER VOLUME/CENTER LEVEL/REAR LEVEL / SUBWOOFER LEVEL UP/DOWN ( / ) BUTTONS

MUTE BUTTON

					PRESET SCAN BUTTON
POWER	SLEEP		P. SCAN	DISPLAY	SYSTEM DISPLAY BUTTON
				SYS	SYSTEM DISPLAY BUTTON
1	2	3	4	5	NUMERIC BUTTONS – for selecting preset stations
					NUMERIC BUTTONS – for selecting preset stations
6	7	8	9	0	or entering frequency directly in tuner mode.
					For selecting a track or a disc in CD mode.
DISC					When selecting a disc, select disc No. (1~5) within 2
CD			REPEAT	INTRO	sec. after pressing the DISC button.
			A< >B	SCAN	sec. after pressing the DISC button.
CD	TUNER		DECK SEL		■ TAPE DECK SECTION
			A	B	■ TAPE DECK SECTION
FUNC
TAPE1	TAPE2				DECK SELECTOR A, B – for selecting deck A or B
	MON				DECK SELECTOR A, B – for selecting deck A or B
DVD	PHONO				, – to begin forward or reverse side playback
VCR1	AUX/TV				– for pausing playback or recording
					– to stop playback or recording
	LDP				, – to wind tape reverse or forward
EQ				DECK	, – to wind tape reverse or forward
PRESET	USER	FILE DISPLAY T.MON			– for recording
S.MODE	D.TIME		AD JUST	T.TONE	■ EQUALIZER SECTION
					■ EQUALIZER SECTION
REAR LEVEL			CENTER LEVEL		PRESET – for selecting equalizer pattern.
					PRESET – for selecting equalizer pattern.
			MASTER VOLUME		USER – for adjusting equalizer pattern as desired.
					FILE – for selecting desired equalizer pattern in the
SUBWOOFER LEVEL			MUTE		preset or in the user mode.
REMOTE CONTROL UNIT RM-RV-N925					DISPLAY – for selecting equalizer display.
					T.MON – for monitoring the sound of recording or
					playback on tape deck.
					TEST TONE BUTTON
					ADJUST BUTTON

In the DIGI LINK remote control system, if pressing PLAY,etc. on CD player or tape deck, CD or TAPE 2 MONITOR is selected automatically without selecting the input source and then PLAY,etc. starts.

In this case,to listen to TAPE 1, switch off the TAPE 2 MONITOR and select the TAPE 1.

Notes:

Some functions for CD player, tape deck or equalizer may not be available.

For details about functions, refer to the operating instructions of each component.

R-925 specifications

The Sherwood R-925 is a versatile and robust receiver that has made a significant impact in the home audio market. Known for its excellent performance and reliable build quality, it appeals to both audiophiles and casual listeners alike. The R-925, a part of Sherwood’s esteemed lineup, has been designed to deliver high-fidelity sound, along with multiple modern features that enhance the listening experience.

At its core, the Sherwood R-925 boasts a powerful amplifier section. The unit is equipped with a capable output power rating, allowing it to drive a wide range of speakers efficiently. Users can expect clear, dynamic sound reproduction across various genres, from classical to rock. To make the most of its power, the receiver features a robust power supply and high-quality components that reduce distortion and promote clean audio signals.

One of the standout features of the R-925 is its built-in radio tuner. With compatibility for both AM and FM bands, listeners can easily access a plethora of radio stations. The tuner is designed to provide sharp reception and clarity, with presets allowing users to save their favorite stations for easy access.

The R-925 also includes multiple audio inputs, supporting various sources such as CD players, turntables, and streaming devices. This flexibility allows users to integrate the receiver into their existing audio systems seamlessly. Additionally, the receiver features sound-enhancing technologies, such as a sophisticated equalizer that enables users to fine-tune their audio output to match personal preferences or room acoustics.

Another noteworthy characteristic is the user-friendly interface. The R-925 is equipped with a well-organized front panel with ergonomic controls, allowing for easy navigation through options and settings. This intuitive design is coupled with a clear LED display that provides visual feedback on the currently selected source and audio settings.

Incorporating high build quality with a classic aesthetic, the Sherwood R-925 fits neatly into any home setup. It is designed to blend style and functionality, making it a popular choice among home audio enthusiasts. Overall, the Sherwood R-925 offers a compelling package that combines powerful performance, modern features, and user-friendly operation, establishing itself as a worthy contender in the world of audio receivers.