Sherwood R-925 Dolby Digitalac -3, Dolby Pro Logic or Dolby 3 Stereo mode, Church Mode

		Check the delay time to be adjusted.
In Dolby DIGITAL(AC -3), Dolby Pro		10
Logic or Dolby 3 Stereo mode
7	Press the TEST TONE button to adjust the
	volume level of each speaker.
		D.TIME
		• The delay time will be displayed for 5 seconds.
		• In Dolby DIGITAL(AC-3) mode, the corresponding
		delay time will be flickering.
	T.TONE	• The center delay time can be adjustable only in Dolby
		DIGITAL(AC-3) mode.
		• The rear delay time can be adjustable only in Dolby
Test tone will be heard form each speaker for 2		DIGITAL(AC-3) and Dolby Pro Logic modes.
seconds each as follows;
FRONT L	CENTER FRONT R REAR R REAR L SUB	Adjust the delay time.
The test tone will be heard from the subwoofer only		11
when subwoofer is set to “YES” in the Dolby
DIGITAL(AC-3) mode.		AD JUST
Test tone is not heard from rear speakers in Dolby 3
Stereo mode.
Test tone is not heard from center speaker when the		Each time this button is pressed, the delay time
center speaker setting is adjusted to the NONE		changes in regular intervals.
mode.		If the delay time disappears, start from the step 10
		again.
8	Adjust the volume levels of the speakers	Memorize the delay time.
	until they all sound equally loud.	12

			In Dolby Pro Logic mode, the
			rear delay time can be		D.TIME
			memorized without pressing
- CENTER LEVEL +		CENTER LEVEL	the DELAY TIME button.
- REAR LEVEL +	or	REAR LEVEL	13	In Dolby DIGITAL(AC-3) mode, repeat
				the above steps 11 and 12 to adjust the rear
SUBWOOFER		SURBWOOFER LEVEL		delay time.

The rear L and R volume levels are adjusted	In THEATER, HALL, STADIUM or
respectively during the test tone function and all
together while enjoying surround sounds.	CHURCH Mode
	Adjust the volume level of the rear speakers
Cancel the test tone function.	7 relative to that of the front speakers.
9
T.TONE	– REAR LEVEL +
	or	REAR LEVEL

ENGLISH

15