Sherwood RVD-6090R Listening to Radio Broadcasts, Auto tuning, Manual tuning

ENGLISH

LISTENING TO RADIO BROADCASTS

Auto tuning			2	Select the desired band.
1	Select the tuner.			BAND
					MHz
	INPUT SELECTOR
				BAND	FREQUENCY
	VIDEO	or
	AUDIO		TUNER
			Each time this button is pressed, the band is changed
			to FM or AM.
			Pressing the BAND button without first selecting
			TUNER, will automatically select the tuner.
3	Select the tuning mode.		4	Press the TUNING/PRESET UP( ) or
				second.DOWN( ) button for more than 0.5
		TUNING/PRESET		TUNING/PRESET
		MODE

Each time this button is pressed, the mode changes		Then “AUTO” appears on the display. The tuner
		will now search until a station of sufficient
as follows;
		strength has been found. The display shows the
	Tuning mode : “PRESET” goes off.
		tuned frequency and “TUNED”.
	Preset mode : “PRESET” lights up.
		If the station found is not the desired one, simply
		repeat this operation.
		Weak stations are skipped during auto tuning.

Manual tuning

TUNING/PRESET

Manual tuning is useful when you already know the frequency of the desired transmitter.

Perform the steps 1~3 in “Auto tuning” procedure and press the TUNING/PRESET UP( ) or DOWN( ) button repeatedly until the right frequency has been reached.

Presetting radio stations

You can store up to 30 preferred stations in the memory.

1	Tune in the desired station with auto or
	manual tuning.

Press the MEMORY/ENTER button.

2

MEMO/ENTER

“MEM” is flickering for 5 seconds.

18