Sherwood RVD-6090R When CD, VCR2 or DVD is selected as, Input source, Optical Coaxial Analog

When CD, VCR2 or DVD is selected as		6	Adjust the (over all) volume.
input source
4	Select the digital or the analog input
	connected as desired.		MASTER VOLUME
	DIGITAL
	INPUTS
			or
		DOWN	MASTER
			UP

Each time this button is pressed, the corresponding input is selected as follows ;

OPTICAL COAXIAL ANALOG

To listen to Dolby Digital (AC-3) program source		7	Adjust the tone (bass and treble).
in the 2-CH downmix mode, in the stereo mode,
the corresponding digital input should be selected.			BASS	TREBLE
(For details, refer to “Downmixing into 2 front
channels” on page 17)
Notes:
When the selected optical or coaxial digital input is
not connected, the selected DIGITAL INPUT
indicator is flickering, meaning no sound. (Refer to		Notes:
“ENJOYING SURROUND SOUND” on page 14.)		Extreme settings at high volume may damage your
The sound from the component connected to the		speakers.
selected digital input can be heard regardless of the		In the Dolby Digital(AC-3) mode, the tone cannot
selected input source.		be adjusted and the tone direct function is
		automatically switched to ON.
5	Operate the selected component for	8	To listen to a program source without the
	playback.		tone effect.
			DIRECT

When playing back the program sources with	The TONE DIRECT indicator lights up and the
surround sound, refer to “ENJOYING	sound bypasses the tone circuitry.
SURROUND SOUND” on page 14.	To cancel the tone direct function, press this button
	again.

ENGLISH

11