Dacor MRES30 Hinge springs could, Release causing personal, Injury, Do not lift or carry the oven

Page 5

30"

(762mm)

Range Top

Rear of Control

Panel/Oven Door

231/2"

(597mm)

269/16"

(675mm)

Removing the Oven Door

WARNINGS:

1.

Do not attempt to disengage

 

the hinge catches with the

 

door removed from the oven.

 

The hinge springs could

 

release causing personal

 

injury.

2.

Do not lift or carry the oven

 

door by the door handle.

4.

Do not install a fuse in the

 

neutral or ground circuit. A

 

fuse in the neutral or ground

 

circuit may result in an

 

electrical shock hazard.

5.

Do not ground the appliance

 

to a gas supply pipe or hot

 

water pipe.

6.

A grounded cold water pipe

 

must have metal continuity to

 

electrical ground and must not

 

Max. depth

 

to oven door

Door Opened

handle with

door closed 45 1/4"

 

 

(1149mm)

Overall Dimensions (Preference Models)

Isometric View

30"

(762mm)

Open the door to its fully opened position. Rotate the catch over the retaining arm on each hinge. Lift the oven door to about a 30 degree angle from the horizontal position. Pull the door away from the oven while continuing to lift.

be interrupted by insulating

materials. Any insulating

materials must be jumped

with a length of No. 4 copper

wire securely clamped to bare

metal at both ends.

Grounding Instructions (All Models) This appliance must be electrically grounded.

 

Range Top

23 1/2"

 

 

 

 

 

(597mm)

 

 

 

 

25 5/16"

 

Rear of Control

 

 

 

 

(643mm)

 

Panel/Oven Door

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Max. depth

 

 

 

 

 

 

to oven door

 

 

 

handle with

 

Door Opened

door closed

45 1/4" (1149mm)

Overall Dimensions (MRES Model)

Isometric View

Installing the Anti-Tip Bracket

WARNING:

This appliance require an anti- tip device. Before installing the range, you must locate and secure the anti-tip bracket to the floor.

When the range is slid into position in the cutout, the left rear leveling leg slides into this bracket to prevent the unit from tipping forward. The bracket location shown here will position the rear edge of the range top frame flush to the rear wall. From this position, the bracket allows for up to 5/8” (16mm) of forward movement of the range.

11/2”

(38mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19 7/16”

24”

(610mm)

(494mm)

 

 

Front face

C

of cabinet

 

L

Removing the Oven Door

Remove the Kick Panel (All Models)

Remove the screw at each top corner of the kick panel. Lift up slightly on the panel and pull forward to remove

Electrical Connection

NOTE:

See the range data plate for electrical specifications. See page 1 for location.

WARNINGS:

1.All of these range models must be connected to a grounded, metallic, permanent

wiring system. Alternatively, a grounding conductor should be connected to the grounding terminal or lead on the appliance.

3. Do not use an extension cord

With the range positioned directly in front of the cabinet cutout, feed the appliance conduit to the electrical junction box. Then, depending upon local codes, utilize one of the following techniques to connect the appliance to the electrical power supply:

A.Connecting to a Four-Wire Electrical System. (Recommended for All Models)

1.Separate the green and white appliance wires.

2.Connect the white appliance wire to the neutral (white) supply wire in the junction box.

3.Connect the black appliance wire to the black (L1) power supply wire in the junction box.

4.Connect the red appliance wire to the red (L2) power supply wire in the junction box.

5.Connect the green appliance wire to the green house grounding wire in the junction box.

 

Cable from

 

power supply

 

 

Junction

 

 

box

RED

 

WHITE

RED

 

 

WHITE

 

 

GREEN

BLACK

GREEN

BLACK

 

 

 

 

Wire nut

 

 

(4 places)

 

Conduit from

 

appliance

Connecting the appliance to a

four-wire power supply

(All Models)

2 3/16” 113/8”

(556mm) (289mm)

1”

(25mm)

with this appliance. Such use

may result in fire, electrical

shock, or other personal

Location of Anti-Tip Bracket

Top View

injury.



Image 5
Contents Conventions Used in These Instructions Installation Instructions Preference and Millennia RangesRead all instructions before using the appliance Important Safety InstructionsVerifying the Package Contents RSE30 Shown Utilities may be locatedDo not install a fuse Release causing personalHinge springs could InjuryOnly Cold Water Pipe Where Local Codes Permit. All ModelsVerify Proper Operation for Electric Ranges RSE and Mres Web Site Corporate Phone 800

MRES30, RSE30, rsd30 specifications

Dacor, a brand renowned for its luxury kitchen appliances, has made significant strides in the industry with its RSD30, RSE30, and MRES30 models. Each of these appliances is crafted for efficiency, elegance, and innovation, embodying Dacor's commitment to quality and cooking excellence.

The Dacor RSD30 is a standout range that elevates culinary experiences with its robust features and advanced technologies. This 30-inch built-in double oven allows for flexible cooking options, accommodating various meal preparations simultaneously. Its true convection technology ensures even heat distribution, resulting in perfectly baked goods and roasted meats. The stunning design includes a color LCD touchscreen that simplifies control, enabling users to customize cooking settings effortlessly. Additionally, the RSD30 features a self-cleaning mode that saves valuable time while maintaining the oven's pristine condition.

Moving to the Dacor RSE30, this 30-inch built-in steam oven is designed for health-conscious cooks who seek to preserve the natural flavors and nutrients of their ingredients. The RSE30's rapid preheat feature significantly reduces cooking time, while its multiple cooking modes—such as steam, convection, and bake—offer versatility for various recipes. With a large capacity, this steam oven can accommodate whole meals, making it perfect for family gatherings. The sleek design complements any kitchen aesthetic, and the intuitive controls enhance the overall cooking experience.

Lastly, the MRES30 is Dacor’s visionary induction range that combines high performance with contemporary design. This 30-inch model is equipped with ultra-responsive induction cooking technology, providing precise temperature control and faster cooking times. Its seamless glass-ceramic surface not only looks luxurious but is also easy to clean. The MRES30 boasts an integrated warming drawer, allowing for meal prep versatility while keeping dishes at optimal serving temperatures. Additionally, it offers smart technology compatibility, enabling remote monitoring and control through smart devices.

In summary, the Dacor RSD30, RSE30, and MRES30 are exemplary appliances that deliver exceptional performance and modern design for the discerning home chef. With features prioritizing efficiency, precision, and aesthetics, Dacor’s offerings exemplify the perfect fusion of form and function, making them indispensable assets for any luxury kitchen. The thoughtful integration of advanced cooking technologies ensures that culinary enthusiasts can explore their passions with confidence and ease.