YOU MUST USE STABILITY ANTI TIP BRACKET TO PREVENT UNIT FROM TIPPING.
Dotted line showing the position of the range when installed
ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS
1.The anti-tip bracket has to be attached as shown on figure below (only rear central position), it has to be fixed on the floor and on the rear wall by no. 4 (four) suitable screws (not supplied).
2.After fixing the anti-tip bracket, slide range into place. Be sure the rear central foot slides under the anti-tip bracket attached.
ANTI-TIP STABILITY
DEVICE FIXING
Anti-tip stability device
Rear central feet of range
Fig. 1.10
