DeLonghi DL48P6G-E, DL 48 P6G Conversion to LP/PROPANE GAS, Setting the Pressure Regulator fig

CONVERSION TO LP/PROPANE GAS

Every range is provided with a set of injectors for the various types of gas.

Select the injectors to be replaced according to the “INJECTORS TABLE”.

The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of each injector.

SETTING THE PRESSURE REGULATOR (fig. 2.5)

The pressure regulator is accessible by removing the left warmer drawer; the pressure regulator is positioned on the rear left side of the range.

To remove the warming drawer:

1.Open the drawer completely (fig. 2.5)

2.Move down the lever of left guide (fig. 2.6) and up the lever of right guide (fig. 2.7).

3.Remove the drawer; the levers have to be keep moved (fig. 2.5).

Fig. 2.7

2

3

2

Fig. 2.5

Fig. 2.6

17