Electrical Grounding Instructions

GENERAL INFORMATION

1.Installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1-Latest Edition.

2.Installation in manufactured (mobile) home: installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.

3.Installation in Recreational Park Trailers: installation must conform with state or other codes or, in the absence of such codes, with the Standard for Recreational Park Trailers, ANSI A119.5.

4. WARNING!!

This appliance shall not be used for space heating. This information is based on safety considerations.

5.AlI openings in the wall behind the appliance and in the floor under the appliance shall be sealed.

6.Keep appliance area clear and free from combustible materials, gasoline, and other flammable vapors.

7.Do not obstruct the flow of combustion and ventilation air.

8.Disconnect the electrical supply to the appliance before servicing.

9.When removing appliance for cleaning and/or service;

A.Shut off gas at main supply.

B.Disconnect AC power supply.

C.Disconnect gas line to the inlet pipe.

D.Carefully remove the range by pulling outward. CAUTION: Range is heavy; use care in handling.

10.Electrical Requirement

Electrical installation should comply with national and local codes.

11.Air Supply and Ventilation

The installer must refers to local/national codes.

12.Gas Manifold Pressure

Natural gas - 4.0” W.C.P. LP/Propane - 11.0” W.C.P.

13.The misuse of oven door (e.g. stepping, sitting, or leaning on them) can result in potential hazards and/or injuries.

14.When installing or removing the range for service, a rolling lift jack should be used. Do not push against any of the edges of the range in an attempt to slide it into or out of the installation. Pushing or pulling a range (rather than using a lift jack) also increases the possibility of bending the leg spindles or the internal coupling connectors.

WARNING!!

The range must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA No. 70-latest edition. Installation should be made by a Iicensed electrician.

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

If an external electrical source is utilized, the installation must be electrically grounded in accordance with local codes or, in the absence of local codes, with the national Electrical Code, ANSI/NFPA 70.

REPLACEMENT PARTS

Only authorized replacement parts may be used in performing service on the range. Replacement parts are available from factory authorized parts distributors. Contact the nearest parts distributor in your area.

DL48P6G-E, DL 48 P6G specifications

The DeLonghi DL 48 P6G, also known as the DL48P6G-E, is a cutting-edge appliance designed to enhance your everyday cooking experience. This multifunctional kitchen device is particularly known for its innovative features and reliable performance, making it a must-have for both culinary enthusiasts and busy families.

One of the main highlights of the DeLonghi DL 48 P6G is its versatility. It serves multiple functions including steaming, frying, roasting, and grilling. This means that it can replace several kitchen appliances, thus saving valuable countertop space. The user-friendly design allows for seamless transitions between modes, enabling you to prepare a wide variety of meals with ease.

The DL 48 P6G is equipped with advanced temperature control technology, ensuring precise cooking at any setting. The adjustable temperature range allows you to experiment with different cooking methods, from slow-cooked stews to high-temperature grilling. This level of control is particularly important for achieving perfect results, whether you’re preparing delicate fish or hearty meats.

Another standout feature of the DL 48 P6G is its efficient energy consumption. Designed with modern technology, this appliance maximizes performance while minimizing energy use. This eco-friendly aspect makes it an excellent choice for those who are conscious about their carbon footprint without compromising on quality.

The product is also designed with durability in mind. High-quality materials ensure that it withstands the rigors of daily use, while its sleek design will complement any kitchen decor. The easy-to-clean surfaces add to its practical aspect, as maintaining cleanliness after cooking becomes a straightforward task.

In terms of safety, the DL 48 P6G includes features such as automatic shut-off, which ensures peace of mind while cooking. Additionally, the appliance boasts a cool-touch exterior, allowing for safe handling even during extended cooking sessions.

In summary, the DeLonghi DL 48 P6G, DL48P6G-E is a highly advanced kitchen appliance that combines versatility, precise cooking control, energy efficiency, durability, and safety. These characteristics make it an ideal choice for anyone looking to elevate their culinary skills while enjoying the convenience of modern technology in their kitchen. Whether you are preparing a quick meal or an elaborate feast, the DeLonghi DL 48 P6G is sure to meet and exceed your expectations.