GE JBP70, EER2000 owner manual Using the clock and timer, Instructions

Using the clock and timer. www.GEAppliances.com

Not all features are on all models.

Safety

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self-cleaning cycle.

Press the CLOCK pad.

Press the HOUR and MIN. pads until the time of day shows in the display.

Instructions Operating

To Black-Out the Clock

If you have several clocks in your kitchen, you may wish to black-out the time of day display of your range. If so, press the CLOCK pad.

Press the CLOCK pad twice to retain the time of day after a black-out.

Although you cannot see it, the clock maintains the correct time of day. It will reappear for the duration of any function that displays a Start Time or Cook Time. Press the CLOCK pad again to bring back the display.

Instructions

To Set the Timer

Press the TIMER ON/OFF pad.

The timer is a minute timer only.

The timer does not control oven operations.

The maximum setting on the timer is 11 hours and 59 minutes.

Press the HOUR and MIN. pads until the amount of time you want shows in the display. The timer will start automatically within a few seconds of releasing the pad.

Care and Cleaning

To Reset the Timer

If the display is still showing the time remaining, you may change it by pressing the HOUR and MIN. pads until the time you want appears in the display.

If the remaining time is not in the display, recall the remaining time by pressing the TIMER ON/OFF pad and then pressing the HOUR and MIN. pads until the new time you want shows in the display.

Troubleshooting Tips

To Cancel the Timer

Press the TIMER ON/OFF pad twice.

	End of Cycle Tones
or	Clear the tones by pressing the pad of the
	function you are using.

13

Consumer Support