Type of margarine will affect baking performance

Using the Sabbath Feature.

(Designed for use on the Jewish Sabbath and Holidays) (on some models)

How to Exit the Sabbath Feature

Touch the CLEAR/OFF pad.

If the oven is cooking, wait for a random delay period of approximately 30 seconds to 1 minute, until only ⊃ is in the display.

Touch and hold both the BAKE and BROIL HI/LO pads, at the same time, until the display shows SF.

Tap the CLOCK pad until ON or OFF appears in the display. ON indicates that the oven will automatically turn off after 12 hours. OFF indicates that the oven will not automatically turn off. See

the Special Features section for an explanation of the 12 Hour Shut-Off feature.

Touch the START/ON pad.

NOTE: If a power outage occurred while the oven was in Sabbath, the oven will automatically turn off and stay off even when the power returns. The oven control must be reset.

Adjust the oven thermostat—Do it yourself!

You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat yourself.

Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven. These thermometers may vary 20–40 degrees.

NOTE: This adjustment will not affect the broiling or the self-cleaning temperatures. The adjustment will be retained in memory after a power failure.

Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

To Adjust the Thermostat

Touch the BAKE and BROIL HI/LO pads at the same time until the display shows SF.

Touch the BAKE pad. A two-digit number shows in the display.

The oven temperature can be adjusted up to (+) 35°F hotter or (–) 35°F cooler. Touch the + pad to increase the temperature in 1-degree increments.

Touch the – pad to decrease the temperature in 1-degree increments.

When you have made the adjustment, touch the START/ON pad to go back to the time of day display. Use your oven as you would normally.

NOTE: This adjustment will not affect the broiling or self-cleaning temperatures. It will be retained in memory after a power failure.

Consumer Support

The type of margarine will affect baking performance!

Most recipes for baking have been developed using high-fat products such as butter or margarine (80% fat). If you decrease the fat, the recipe may not give the same results as with a higher-fat product.

Recipe failure can result if cakes, pies, pastries, cookies or candies are made with low-fat spreads. The lower the fat content of a spread product, the more noticeable these differences become.

Federal standards require products labeled “margarine” to contain at least 80% fat by weight. Low-fat spreads, on the other hand, contain less fat and more water. The high moisture content of these spreads affects the texture and flavor of baked goods. For best results with your old favorite recipes, use margarine, butter or stick spreads containing at least 70% vegetable oil.

EER3000 specifications

The GE EER3000 is a cutting-edge energy-efficient equipment that redefines the landscape of modern electrical devices. Designed for both residential and commercial applications, this innovative unit provides top-tier performance, reliability, and environmental responsibility. At the heart of the EER3000 is its advanced energy efficiency rating, which significantly reduces energy consumption compared to traditional models, culminating in lower electricity bills and a reduced carbon footprint.

One of the standout features of the EER3000 is its intelligent energy management system. This technology utilizes real-time data to optimize energy usage, adjusting performance based on actual demand. Such adaptive capabilities not only enhance efficiency but also prolong the equipment's lifespan by minimizing wear and tear during idle periods.

In terms of connectivity, the EER3000 is equipped with Wi-Fi-enabled smart technology, allowing users to control and monitor the unit remotely through a dedicated mobile app. This feature provides convenience and peace of mind, enabling users to adjust settings and schedule operations from anywhere. Additionally, the integration with smart home systems means the EER3000 can be part of a larger ecosystem that includes other connected devices.

The EER3000 is designed with an emphasis on user safety and ease of operation. It comes with a user-friendly interface, complete with clear displays and straightforward controls, making it accessible for all consumers regardless of their technical expertise. Safety features include over-current protection, automatic shut-off mechanisms, and advanced surge protection to safeguard against unexpected power fluctuations.

Another notable characteristic of the GE EER3000 is its quiet operation. Utilizing noise-reducing technologies, this equipment can function at lower decibel levels, making it ideal for environments where noise might be a concern, such as hospitals or residential areas.

The construction of the EER3000 also reflects durability and resilience. Built with high-quality materials, the unit is designed to withstand varying environmental conditions, ensuring longevity and consistent performance over time.

Overall, the GE EER3000 represents a significant leap forward in energy-efficient technology, combining smart features, robust safety protocols, and quiet operation to meet the needs of today's eco-conscious consumers. Whether for home or business, the EER3000 stands as a testament to GE’s commitment to innovation and sustainability, making it a wise choice for a responsible future.