GE EER3000 Operating, Storage Drawer Removal on some models, Broiler Pan & Grid, Oven Floor

Page 26

Instructions

Care and cleaning of the range.

Storage Drawer Removal (on some models)

To remove the drawer:

To replace the drawer:

Instructions Safety

Rail

Stop guide

Pull the drawer out until it stops.

Lift the front of the drawer until the stops clear the guides.

Remove the drawer.

Place the drawer rails on the guides.

Push the drawer back until it stops.

Lift the front of the drawer and push back until the stops clear the guides.

Lower the front of the drawer and push back until it closes.

Operating

After broiling, remove the broiler pan from the oven. Do not store a soiled broiler pan and grid anywhere in the range.

Broiler Pan & Grid

Do not clean the broiler pan or grid in a self- cleaning oven.

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a dishwasher.

Troubleshooting Tips Care and Cleaning

Wire cover holder.

Oven Light Replacement

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

To remove the cover:

Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt appliance bulb.

To replace the cover:

Place it into groove of the light receptacle. Pull wire forward to the center of the cover until it snaps into place.

Connect electrical power to the range.

Consumer Support

Oven Floor

Do not clean the broil element. Any soil

On some models, the bake element is not

will burn off when the element is heated.

exposed and is under the oven floor. If spillovers,

Clean the oven floor with warm, soapy

residue or ash accumulate on the oven floor,

water.

wipe up before self-cleaning.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents RangesSelf-Cleaning Radiant Write the model and serial numbers here Model # Serial #Important Safety Notice All ranges can tip and injury could resultSafety Instructions Operating Instructions Care and Cleaning Ge.comConsumer Support Cleaning Operating Instructions SafetyTroubleshooting Tips Care Radiant Surface Units Troubleshooting Tips Care and Cleaning Operating InstructionsSafety Using the surface unitsCleaning Instructions Cleaning OperatingConsumer Support Troubleshooting Tips Care Selecting types of cookware SafetyTroubleshooting Tips Consumer Support Using the oven controls Oven Control, Clock and Timer Features and SettingsCare and Cleaning Troubleshooting Tips Consumer Support Power OutageInstructions How to Set the Oven for Baking or RoastingPreheating and Pan Placement Before you begin…Instructions Operating Care and Cleaning Troubleshooting Tips Consumer SupportHow to Set the Upper Oven for Broiling Broiling GuideUsing the clock and timer SupportHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopHour Shut-Off Special features of your oven controlSafety Instructions Using the Sabbath Feature Operating Instructions Care and CleaningType of margarine will affect baking performance To Adjust the ThermostatHow to Exit the Sabbath Feature To Use the Warming Drawer Using the warming drawer. on some modelsWhen Using the Warming Drawer Instructions OperatingTo Crisp Stale Items Consumer Support Troubleshooting Tips Care and CleaningTemperature Selection Chart To Warm Serving Bowls and PlatesBefore a Clean Cycle Using the self-cleaning ovenCleaning Troubleshooting Tips Consumer Support SafetyHow to Delay the Start of Cleaning Consumer Support Troubleshooting TipsAfter a Clean Cycle Control Knobs Care and cleaning of the rangeHow to Remove Protective Shipping Film and Packaging Tape Oven VentLift-Off Oven Door Painted SurfacesControl Panel Stainless Steel Surfaces on some models Instructions OperatingOven Shelves Removable Warming Drawer PanStorage Drawer Removal on some models Oven Light ReplacementOperating Broiler Pan & GridBurned-On Residue Cleaning the glass cooktopNormal Daily Use Cleaning Heavy, Burned-On ResidueDamage from Sugary Spills and Melted Plastic Metal Marks and ScratchesCooktop Seal To Order PartsBefore You Call For Service… Problem Possible Causes What To DoRemoval instructions in the Care and cleaning Clock and timer doSee the Using the clock and timer section Not workClean cycle During a clean cycleUnlock Oven not clean after Won’t closeOr letter flash Power outageA number DisplayWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Ge.com Consumer Support Troubleshooting Tips Care and Cleaning Ge.com Accessories Looking For Something More?Care GE Electric Range WarrantyCleaning Troubleshooting Tips Consumer Support GE Will ProvideConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio
Related manuals
Manual 32 pages 23.43 Kb

EER3000 specifications

The GE EER3000 is a cutting-edge energy-efficient equipment that redefines the landscape of modern electrical devices. Designed for both residential and commercial applications, this innovative unit provides top-tier performance, reliability, and environmental responsibility. At the heart of the EER3000 is its advanced energy efficiency rating, which significantly reduces energy consumption compared to traditional models, culminating in lower electricity bills and a reduced carbon footprint.

One of the standout features of the EER3000 is its intelligent energy management system. This technology utilizes real-time data to optimize energy usage, adjusting performance based on actual demand. Such adaptive capabilities not only enhance efficiency but also prolong the equipment's lifespan by minimizing wear and tear during idle periods.

In terms of connectivity, the EER3000 is equipped with Wi-Fi-enabled smart technology, allowing users to control and monitor the unit remotely through a dedicated mobile app. This feature provides convenience and peace of mind, enabling users to adjust settings and schedule operations from anywhere. Additionally, the integration with smart home systems means the EER3000 can be part of a larger ecosystem that includes other connected devices.

The EER3000 is designed with an emphasis on user safety and ease of operation. It comes with a user-friendly interface, complete with clear displays and straightforward controls, making it accessible for all consumers regardless of their technical expertise. Safety features include over-current protection, automatic shut-off mechanisms, and advanced surge protection to safeguard against unexpected power fluctuations.

Another notable characteristic of the GE EER3000 is its quiet operation. Utilizing noise-reducing technologies, this equipment can function at lower decibel levels, making it ideal for environments where noise might be a concern, such as hospitals or residential areas.

The construction of the EER3000 also reflects durability and resilience. Built with high-quality materials, the unit is designed to withstand varying environmental conditions, ensuring longevity and consistent performance over time.

Overall, the GE EER3000 represents a significant leap forward in energy-efficient technology, combining smart features, robust safety protocols, and quiet operation to meet the needs of today's eco-conscious consumers. Whether for home or business, the EER3000 stands as a testament to GE’s commitment to innovation and sustainability, making it a wise choice for a responsible future.
Top Page Image Contents