Safety Instructions
Installation of the range.
Read these instructions completely and carefully.
Protect Your Floor
Operating Instructions
Your range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. When moving the range on this type of flooring, use care, and it is recommended that these simple and inexpensive instructions be followed.
The range should be installed on a sheet of plywood (or similar material) as follows: When the floor covering ends at the front of the range, the area that the range will rest on should be built up with plywood to the same level or higher than the floor covering. This will allow the range to be moved for cleaning or servicing.
Customer Service Troubleshooting Tips Installation Instructions Care and Cleaning
Installing the Backguard
Place the backguard on top of the end panels at the rear of the range.
Insert two machine screws through the holes at the bottom of each end cap. Secure the screws to the range frame with the hex nuts provided.
Insert two machine screws through the front of the backguard at each end. Secure the screws to the range frame with the hex nuts provided.
18