GE PB970, PB975 warranty Power Cord Strain Relief Installation, Do not discard the screw

Page 5

Installation Instructions

3POWER CORD AND

STRAIN RELIEF INSTALLATION

ARemove the terminal block cover (on the back of the range) by removing the screw, using a 1/4” nut driver.

Do not discard the screw.

Screw to

remove terminal block cover

Back of range

Terminal

 

 

block cover

BRemove the knockout ring (138) located on bracket directly below the terminal block. To remove the knockout, use a pair of pliers to bend the knockout ring away from the bracket and twist until ring is removed.

NOTE: You only need to remove the knockout ring for power cord installation.

Terminal block (appearance may vary)

Knockout

Knockout ringring removed in bracket

5

CFor power cord installations only (see the next step if using conduit), assemble the strain relief in the hole. Insert the power cord through the strain relief and tighten. Allow enough slack to easily attach the cord terminals to the terminal block. If tabs are present at the end of the winged strain relief, they can be removed for better fit.

NOTE: Do not install the power cord without a strain relief. The strain relief bracket should be installed before reinstalling the rear range wiring cover.

Terminal block

Strain relief

Power cord Bracket

Skip to Step 4 or 5.

DFor conduit installations only, purchase a squeeze connector matching the diameter of your conduit and assemble it in the hole. Insert the conduit through the squeeze connector and tighten. Allow enough slack to easily attach the wires to the terminal block.

NOTE: Do not install the conduit without a squeeze connector. The squeeze connector should be installed before reinstalling the rear range wiring cover.

Terminal block

Squeeze

connector

Conduit

Bracket

Skip to Step 6 or 7.

Image 5
Contents Before YOU Begin For Your SafetyANTI-TIP Device Read these instructions completely and carefullyTools YOU will Need Prepare to Install the RangeMaterials YOU MAY Need Parts IncludedPrepare the Opening Electrical Requirements Electrical ConnectionsDo not discard the screw Power Cord Strain Relief InstallationCut and discard the ground strap. do not Discard ANY Screws Electrical ConnectionsDo not remove the ground strap connection Wire Conduit Installation Replace the Wire Cover Install the RangeANTI-TIP Device Installation Prepare to Level ModelsLevel the Range Operation ChecklistPage

PB970, PB975 specifications

The GE PB975 and PB970 are two contemporary offerings from General Electric that exemplify advanced engineering in the realm of electric cooking ranges. These models are designed to cater to the culinary needs of modern households while providing innovative features that enhance cooking efficiency and convenience.

One of the defining features of the GE PB975 and PB970 is their induction cooking technology. Induction cooking utilizes electromagnetic energy to directly heat pots and pans, resulting in faster cooking times compared to traditional gas or electric burners. This technology not only saves time but also enhances energy efficiency, as heat is generated directly in the cookware rather than relying on the heating surface. This characteristic is particularly appealing to environmentally conscious consumers, as it reduces overall energy consumption.

Both models come equipped with various cooking modes, including bake, broil, and warm, allowing users to whip up a diverse array of dishes. The convection feature, present in the PB975, circulates hot air throughout the oven for even cooking results. This ensures that baked goods rise evenly and meats roast to perfection. The user-friendly digital control panel provides precise temperature control and allows for easy programming of cooking times and temperatures.

A standout characteristic of the GE PB975 and PB970 is the built-in self-cleaning feature. This technology employs high temperatures to burn off residues and grease, transforming them into ash that can be easily wiped away. This saves users considerable time and effort in maintaining a clean kitchen.

The design of both ranges is both functional and aesthetically pleasing. The sleek stainless steel finish and modern lines make them a stylish addition to any kitchen. The spacious oven interiors can accommodate large meal preparations, making them suitable for families and entertaining guests.

Safety features like child lock settings and auto shut-off add an extra layer of reassurance for families, ensuring a safer cooking environment. Moreover, the ranges boast easy-to-clean smooth top surfaces that prevent food from sticking and simplify overall maintenance.

In summary, the GE PB975 and PB970 are excellent electric ranges that merge state-of-the-art technology with practical design. With their induction cooking capabilities, convection baking, and user-friendly controls, these models are well-suited for anyone seeking to elevate their culinary experiences. Their combination of style, safety, and efficiency makes them a standout choice in the crowded market of kitchen appliances.