GE PB970, PB975 warranty Wire Conduit Installation

Page 7

Installation Instructions

6 3-WIRE CONDUIT INSTALLATION

ALoosen the 3 lower terminal screws from the terminal block. Insert the center bare wire (white/neutral) tip through the bottom center terminal block opening. On certain models, the wire will need to be inserted through the ground strap opening and then into the bottom center block opening. Insert the two side bare wire tips into the lower left and the lower right terminal block openings. Tighten the screws until the wire is firmly secured (35 to 50 inch-lbs.). Do not over-tighten the screws since it could damage the wires.

NOTE: ALUMINUM WIRING:

Aluminum building wire may be used but it must be rated for the correct amperage and voltage to make connection. Connect wires according to this Step 6 or Step 7 depending on number of wires.

Terminal block

Wire tips

Bracket

Conduit

Wire used, location and enclosure

of splices, etc., must conform to good wiring practices and local codes.

BSkip to Step 8 and proceed with the installation.

7 4-WIRE CONDUIT INSTALLATION

ALoosen the three lower terminal screws from the terminal block. Remove the ground screw and ground plate and retain them.

Cut and discard the ground strap. DO NOT DISCARD ANY SCREWS.

BInsert the ground bare wire tip between the range frame and the ground plate (removed earlier) and secure it in place with the ground screw (removed earlier). Insert the bare wire (white/neutral) tip through the bottom center of the terminal block opening. Insert the two side bare wire tips into the lower left and the lower right terminal block openings. Tighten the screws until the wire is firmly secured (35 to 50 inch-lbs.). Do not over-tighten the screws since it could damage the wires.

Before

Ground strap

 

Terminal

or

block

 

Ground strap

Neutral

 

 

terminal

After

 

Terminal

Ground

block

plate

 

Wire tips

(grounding

to range)

 

Ground

screw

Bracket

Wire used, location and enclosure

of splices, etc., must conform to good wiring practices and local codes.

CProceed to Step 8.

7

Image 7
Contents Read these instructions completely and carefully For Your SafetyBefore YOU Begin ANTI-TIP DeviceParts Included Prepare to Install the RangeTools YOU will Need Materials YOU MAY NeedPrepare the Opening Electrical Requirements Electrical ConnectionsDo not discard the screw Power Cord Strain Relief InstallationDo not remove the ground strap connection Electrical ConnectionsCut and discard the ground strap. do not Discard ANY Screws Wire Conduit Installation Prepare to Level Models Install the RangeReplace the Wire Cover ANTI-TIP Device InstallationLevel the Range Operation ChecklistPage

PB970, PB975 specifications

The GE PB975 and PB970 are two contemporary offerings from General Electric that exemplify advanced engineering in the realm of electric cooking ranges. These models are designed to cater to the culinary needs of modern households while providing innovative features that enhance cooking efficiency and convenience.

One of the defining features of the GE PB975 and PB970 is their induction cooking technology. Induction cooking utilizes electromagnetic energy to directly heat pots and pans, resulting in faster cooking times compared to traditional gas or electric burners. This technology not only saves time but also enhances energy efficiency, as heat is generated directly in the cookware rather than relying on the heating surface. This characteristic is particularly appealing to environmentally conscious consumers, as it reduces overall energy consumption.

Both models come equipped with various cooking modes, including bake, broil, and warm, allowing users to whip up a diverse array of dishes. The convection feature, present in the PB975, circulates hot air throughout the oven for even cooking results. This ensures that baked goods rise evenly and meats roast to perfection. The user-friendly digital control panel provides precise temperature control and allows for easy programming of cooking times and temperatures.

A standout characteristic of the GE PB975 and PB970 is the built-in self-cleaning feature. This technology employs high temperatures to burn off residues and grease, transforming them into ash that can be easily wiped away. This saves users considerable time and effort in maintaining a clean kitchen.

The design of both ranges is both functional and aesthetically pleasing. The sleek stainless steel finish and modern lines make them a stylish addition to any kitchen. The spacious oven interiors can accommodate large meal preparations, making them suitable for families and entertaining guests.

Safety features like child lock settings and auto shut-off add an extra layer of reassurance for families, ensuring a safer cooking environment. Moreover, the ranges boast easy-to-clean smooth top surfaces that prevent food from sticking and simplify overall maintenance.

In summary, the GE PB975 and PB970 are excellent electric ranges that merge state-of-the-art technology with practical design. With their induction cooking capabilities, convection baking, and user-friendly controls, these models are well-suited for anyone seeking to elevate their culinary experiences. Their combination of style, safety, and efficiency makes them a standout choice in the crowded market of kitchen appliances.