Roland SRA-200E important safety instructions Main Specifications, Rated Power Output

Page 15

Main Specifications

• Rated Power Output

100 W x 2 (stereo, 8 ohms load, 1 kHz, 0.1 % or less THD)

150 W x 2 (stereo, 4 ohms load, 1 kHz, 0.1 % or less THD)

300 W (BTL, 8 ohms load, 1 kHz, 0.5 % or less THD)

• Frequency Response

20 Hz to 50 kHz (+0/- 1 dB, 1 W/8 ohms)

Input Impedance

Balanced Input: 10 k ohms

Unbalanced Input: 10 k ohms

Input Sensitivity

-10 dBm/+4 dBm

Non-Clip Maximum Input

+24 dBm

Recommended Load Impedance

4 ohms or greater (stereo)

8 ohms or greater (BTL)

Power Band Width

20 Hz to 20 kHz (stereo, 8 ohms load, 50 W, 0.2 % or less THD)

20 Hz to 20 kHz (BTL, 8 ohms load, 150 W, 0.2 % or less THD)

• Total Harmonic Distortion

0.05% or less (stereo, 8 ohms load, 1 kHz, 50 W)

0.05% or less (stereo, 4 ohms load, 1 kHz, 75 W)

0.07% or less (BTL, 8 ohms load, 1 kHz, 150 W)

• S/N Ratio

100 dB or greater (input terminate with 150 ohms, input sensitivity +4 dBm, IHF-A weighted)

• Damping Factor

125 or greater (8 ohms load, 1 kHz)

• Channel Separation

65 dB or greater (8 ohms load, 1 kHz, 50 W, DIN audio weighted)

• Slew Rate

11 V/micro sec or greater (stereo, 8 ohms load)

Controls

Attenuators x 2 (A, B) Power Switch

MODE Switch (STEREO/BTL)

INPUT LEVEL Switch (+4 dBm/-10 dBm)

Indicators

Power Indicator

Clip Indicators (A, B)

Level Indicators (A, B)

Protection Indicator

• Connectors

Balanced Input Jacks (1/4 inch TRS phone type) x 2 (A, B)

Balanced Input Connectors (XLR-3-31 type) x 2 (A, B) Balanced Input Terminals x 2 (A, B)

Speaker Terminals (Binding Posts) x 2 (A, B)

• Power Supply

AC 117/230/240 V (50/60 Hz)

Power Consumption

130 W (AC 117/230/240 V)

Dimensions

482 (W) x 364 (D) x 48.6 (H) mm

19 (W) x 14-3/8 (D) x 1-15/16 (H) inches (EIA-1U rack mount type)

• Weight

5.0 kg/11 lbs 1 oz

Accessories

Owner's Manual Rubber Feet x 4

0 dBm = 0.775 V rms

*In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

15

Image 15
Contents Contents Main FeaturesImportant Safety Instructions Page Additional Precautions Power SupplyPlacement MaintenanceNames and Functions Protection IndicatorPower Indicator Power SwitchInput Terminals Input Connector XLR-3-31 TypeRear Panel Input Jack TRS Standard Phone TypeInput Level Switch Mode SwitchCooling Fan/Air Vent BTL Connection Connecting Other DevicesParallel Connection Precautions When Connecting and Turning on the Power About the PC Limiter CircuitsAbout the Limiter Tips about Connection Muting Circuit-Protects the Speakers About the Protection CircuitsThermal Protection Circuit-Protects the Amp DC Detection Circuit-Protects the SpeakersAbout Rack Mounting There is no sound TroubleshootingRated Power Output Main SpecificationsDimensions Input IndexInformation