Roland SRA-200E Rear Panel, Input Connector XLR-3-31 Type, Input Jack TRS Standard Phone Type

Rear Panel

5 4

7 6 1 3 2

OUTPUTINPUT

INPUT

1. INPUT Connector (XLR-3-31 Type)

*The pin assignment for the XLR type connectors is as shown below. Before making any connections, make sure that this pin assignment is compatible with that of all your other devices.

21

1:GND

32:HOT

3:COLD

2. INPUT Jack (TRS Standard Phone Type)

Connect using quarter-inch TRS phone type when input is balanced, and connect with quarter-inch phone type when the input is unbalanced.

* Check the pin assignments of other devices before connecting.

GND(SLEEVE)

	GND(SLEEVE)
HOT(TIP)	HOT(TIP)
COLD(RING)
Quarter-inch TRS Phone Type	Quarter-inch Phone Type
(Balanced)	(Unbalanced)

3. INPUT Terminals

*Check the pin assignments of other devices before connecting. When making connections, be careful to avoid los- ing the screws that you remove.

GND HOT

COLD

COLD

HOT GND

6