Cabletron Systems F3 user manual 3 ST Connectors

CONNECTING THE FOT-F3 TO THE NETWORK

T

X

R

X

ST Connectors

ST Fiber Optic

Ports

Fiber 2

Fiber 1

0461-08

Figure 3-3 ST Connectors

6.Check that the LNK LED on the FOT-F3 is on. If the LED is off, perform each of the following steps until the LED is on:

a.Check that the power is on for the device at the other end of the link.

b.Verify that the fiber strands are properly connected to each port.

c.Reverse the fiber optic cable ends at one end of the fiber optic link segment.

FOT-F3 USER’S MANUAL 3-7