Cabletron Systems user manual Surface Mounting the FOT-F3

CHAPTER 3: INSTALLATION

If a link is not established, contact Cabletron Systems Technical Support. Refer to Chapter 1, Getting Help, for instructions.

3.3SURFACE MOUNTING THE FOT-F3

Using the contents of the accessory package, you can mount the FOT-F3 on a surface close to the workstation or on the workstation itself.

The surface you choose should meet the following requirements:

•Allows the fiber optic segment to be easily connected to the transceiver.

•Allows the AUI cable to be easily connected from the transceiver to the workstation.

•Has a smooth, dirt-free surface which accepts the adhesive bonds.

Mount the FOT-F3 as follows:

1.Separate the two 1.5-inch x 3-inch Velcro mounts.

2.Peel off the paper that covers the adhesive backing of one Velcro mount.

3.Carefully position the Velcro on the back of the FOT-F3. Press firmly on the Velcro to affix it to the FOT-F3.

4.Similarly install the other half of the Velcro on the surface on which you want to mount the FOT-F3.

5.Attach the FOT-F3 to the Velcro mount.

3-8 FOT-F3 USER’S MANUAL