Cabletron Systems user manual Chapter Installation, Unpacking the FOT-F3

CHAPTER 3

INSTALLATION

This chapter contains instructions for unpacking the FOT-F3 Transceiver, connecting the FOT-F3 to an Ethernet device and the network, surface mounting the transceiver (if necessary), and cable support installation. Verify that all the requirements listed in Chapter 2, Installation Requirements, and Appendix A, Specifications, are met before installing the transceiver.

3.1UNPACKING THE FOT-F3

Before installing the FOT-F3, visually inspect the transceiver and check the contents of the accessory package. To unpack the transceiver:

1.Carefully remove the transceiver from the shipping box. Save the shipping box and materials in the event the transceiver has to be reshipped.

2.Remove the transceiver from its protective plastic bag and set the transceiver aside.

3.Remove the accessory package from the box. It should contain:

•One set of Velcro mounts

•Two cable mounts (for strain relief)

•Two 4-inch cable ties

FOT-F3 USER’S MANUAL 3-1