Cabletron Systems Cable Strain Relief for Non-Mounted FOT-F3, 4 Surface Mounting the FOT-F3

CHAPTER 3: INSTALLATION

DEVICE

Tie Wraps

FOT-F3

AUI Cable	Cable Mounts	Fiber Optic
		Segment
		0461-09

Figure 3-4 Surface Mounting the FOT-F3

3.4.2Cable Strain Relief for Non-Mounted FOT-F3

To relieve the strain to cables connected to a FOT-F3 that is not surface mounted, proceed as follows:

1.If possible, use long tie wraps to secure the FOT-F3 to a structural support such as a beam or a rafter.

2.Using additional long tie wraps, secure each cable to the same structural support.

3-10 FOT-F3 USER’S MANUAL