Pinouts of back panel connectors 121
Pinouts of back panel connectors
The back panel has the following connectors:
• Two serial port connectors.
• A video input connector ("Video in").
• Two digital video input connectors ("Digital Video in") (only if Matrox
Meteor-II /Digital for PC/104-Plus is purchased).
• Two Camera Link connectors ("Channel 1" and "Channel 2") (only if Matrox
Meteor-II /Camera Link for PC/104-Plus is purchased).
• An audio input (top) and an audio output (bottom) connector ("Audio").
Serial port connectors
The two serial port connectors are 9-pin, D-SUB male connectors. Although they
are both configured for RS-232 standard, the configuration of the bottom
connector can be changed to accommodate the RS-422/RS-485 standard. For a
detailed description of how to do this, see the BIOS reference appendix.
When the bottom serial port connector is configured for the RS-422/RS-485
standard, you can activate resistor termination on the serial port connector
through the internal dip switch. Refer to the subsection Internal d ip switch in the
Pinouts of internal connectors and dip switches section of this appendix.
The pinouts for the serial ports are outlined in the following tables:
15
69
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - info@techway.fr - +33 (0)1 64 86 58 30