Matrox Electronic Systems 4SIGHT-M - page 123

Pinouts of back panel connectors 123
Video input connector ("Video in")
There is one video input connector ("Video in") on the back panel. The video
input connector is a 44-pin, DB-HD female connectors. The pinouts are outlined
in the following tables. The pinout of the video input connector depends on
whether the Matrox 4Sight-M motherboard hosts a Matrox Meteor-II /Standard,
/Multi-Channel, or /Camera Link frame grabber.
Important Note the following about the power supply:
• The maximum current on a +12 V power supply is 0.75 A.
• Auto-resettable fuse: Yes.
Matrox Meteor-II
/Standard Matrox Meteor-II /Standard
Pin Signal I/O Description
1 DC_OUT O +12V power su pply. The DC_OUT signal is
protected with a 0.75A auto-resettable fuse.
2 VID_IN12 I Video input 12.
3-5 GND - Ground.
6-7 NC - Not connected.
8USER2_OUT OUser output.
9USER2_IN IUser input.
10 NC - Not connected.
11 VID_IN5 I Video input 5.
12 NC - Not connected.
13 VID_IN3 I Video input 3.
14 GND - Ground.
15 VID_IN1 I Video input 1.
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - info@techway.fr - +33 (0)1 64 86 58 30