ge.com
+
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Press the CLOCK pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want, press the START pad.
Press the CLOCK pad again to black out the clock display. The display will show OFF. If this is the choice you want, press the START pad.
Press the CLOCK pad once. The | NOTE: If the clock is in the | |
display will show 12 hr. If this is | ||
will not be able to use the Delay Start function. | ||
the choice you want, press the |
| |
START pad. |
|
Cook and Hold
+ Your control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after Timed Baking or Roasting is finished
NOTE: This feature can only be programmed to work with Timed Baking or Roasting. (See the Using the timed baking or roasting features section.) After Timed Baking or Roasting has automatically stoped, the programmed cook and hold will automatically start.
To activate this feature for use after Timed Baking or Roasting, follow the steps below.
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Press the COOKING TIME pad. The display will show Hld OFF.
Press the COOKING TIME pad again to activate the feature. The display will show Hld ON.
Press the START pad to activate the cook and hold feature and leave the control set in this special features mode.
SafetyInstructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support
19