Audio Button, Programming the RR-949, Power Button

RR-949 Remote Control

The RX-975 includes a handheld remote control that does far more than operate the RX-975. The RR-949 is a full-function program- mable remote control that can operate up to 8 audio/video components.

A separate manual, included with the remote, gives detailed information on programming and using the RR-949 to replace all of the remote controls in your system. This section is intended to provide only that information which pertains to the use of the RR-949 to operate the RX-975.

NOTE: Many functions duplicate the RX-975 front panel controls and are listed here only for your reference. Please refer to the pre- vious Front Panel Controls section of this manual if you need additional information.

AUDIO Button

To operate the RX-975 with the remote, make sure that the AUDIO mode is active by press- ing the AUD button on the remote before you start. If it is active, pressing command keys on the RR-949 will cause the AUDIO button to flash red. Once the AUDIO mode is ac- tive, it will stay active unless you press one of the other DEVICE buttons to control a dif- ferent component.

Programming the RR-949

The RR-949 is preprogrammed from the factory to operate the RX-975. Should the AUDIO command set on your RR-949 not operate the RX-975, it’s possible that the programming has been inadvertently changed. To program the remote to

operate the RX-975, set the AUDIO Code = 001:

1.Press the AUDIO button at the top of the remote while simultaneously pressing the MUTE button and hold both for at least one second. The AUDIO button will light in red for 20 seconds, indicating that you have entered the program mode. The next step must be done within this 20 second period, or the RR-949 will revert to its standard operating mode.

2.Use the NUMERIC buttons to enter the 3-digit code (001) for the RX-975 – press 0, then 0, then 1. The AUDIO button will flash each time you enter a digit.

3.Store the code number by pressing the corresponding AUDIO button again. The button will blink twice to confirm the stor- age of the code in memory.

POWER Button

Duplicates the function of the STANDBY switch on the front panel. Press to activate the RX-975. Press again to deactivate. The main POWER button on the front panel must be in the ON position for the remote standby function to operate.

VOLUME Buttons

A pair of buttons which duplicate the func- tion of the front panel volume control. Press VOLUME UP to increase the volume and press VOLUME DOWN to decrease the volume.

SHIFT Button

Used to access secondary functions on sev- eral RR-949 buttons. Press the SHIFT button and then the desired button.

MUTE Button

Push this button once to turn the sound off. A mute indication will appear in the front panel display. Press the MUTE button again to restore previous volume levels.

PRESET AUTO SCAN Button

[SHIFT] MUTE

This shift function activates a PRESET SCAN- NING feature. Press the SHIFT button and then the MUTE button to scan through all memorized station presets, playing each for five seconds before moving to the next. To stop the station scanning on the desired sta- tion preset, press the MUTE button again.

TV/BAND Button

Duplicates the AM/FM button on the front panel. Toggles between AM and FM modes.

English

TUNE/PRESET Button [SHIFT] TV/BAND

The TUNE/PRESET button toggles between FREQUENCY TUNING mode (the CH TUN- ING buttons advance to the next station fre- quency) and PRESET TUNING mode (the CH TUNING Buttons advance to the next memo- rized station preset). To change modes, press the SHIFT button and then the TV/BAND but- ton. A PRESET indicator in the front panel DISPLAY will light when the PRESET mode is active.

CH TUNING Buttons

A pair of buttons, labeled CH UP/DOWN, which duplicates the functions of the front panel TUNING button.

In the normal FREQUENCY TUNING

mode, press a CH button and release to manually jump to the next station frequency, regardless of whether or not a station is broadcasting on that frequency. For auto scan tuning, press and hold the CH button for ap- proximately one second. An AUTO indica- tor will appear in the front panel display and the tuner will begin automatically scanning up or down through the frequencies until the next available station is detected. If this is not the desired station, repeat the automatic tuning procedure to find the next station. Weak stations will be skipped during auto tuning.

In the PRESET TUNING mode, press a CH button and release to jump to the next memorized station preset. Switch between FREQUENCY and PRESET tuning modes by pressing the SHIFT button and then the BAND/TV button on the remote control. A PRESET indicator appears in the display when PRESET TUNING is activated.

RX-975 specifications

The Rotel RX-975 is a classic integrated amplifier that epitomizes high-fidelity audio performance while delivering versatile features for audiophiles and casual listeners alike. This model, which holds a special place in the hearts of many, is known for its robust construction and impressive audio capabilities.

One of the most noteworthy features of the RX-975 is its power output. Capable of delivering 100 watts per channel into 8 ohms, this integrated amplifier provides the necessary power to drive various speakers effectively, ensuring that the listener experiences a dynamic and rich sound across different music genres. The amplifier employs Rotel's proprietary Class AB amplification technology, which combines the advantages of Class A and Class B designs. This results in lower distortion levels and an enhanced overall audio quality.

The RX-975's build quality is exemplary, featuring a solid metal chassis designed to minimize resonance and external interference, which can compromise sound fidelity. The front panel hosts a selection of rotary knobs and switches that allow users to easily navigate through different inputs and make adjustments to volume and tone controls. This attention to user-friendly design is a hallmark of Rotel products, ensuring that both novice and experienced users can enjoy high-quality audio without a steep learning curve.

In terms of connectivity, the RX-975 is equipped with multiple line-level inputs, ensuring compatibility with a wide range of audio sources, including CD players, turntables, and other devices. Its phono input is specially designed for vinyl enthusiasts, providing a dedicated pathway for turntable signals, preserving the warmth and character of analog recordings.

The RX-975 also features a built-in tuner, offering AM and FM reception, allowing users to enjoy their favorite radio stations effortlessly. The digital display makes it easy to view selected stations and settings, enhancing the overall user experience.

Another key characteristic of the RX-975 is its low noise and high signal-to-noise ratio, which results in a cleaner sound reproduction. This ensures that dynamic range and subtle details in the audio are preserved, making it a popular choice among serious listeners who value audio clarity and precision.

In summary, the Rotel RX-975 is an integrated amplifier that combines power, elegance, and versatility. With its outstanding sound quality, robust build, and thoughtful design features, it remains a compelling choice for anyone looking to elevate their audio experience.