Special features of your oven control. | ge.com |
Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.
When the display shows your choice, press the START pad. The special features will remain in memory after a power failure.
Safety Instructions
12-Hour Shut-Off
With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.
If you wish to turn OFF this feature, follow the steps below.
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Press the DELAY START pad. The display will show 12 shdn
Press the START pad to activate the no shutoff and leave the control set in this special features mode.
Operating Instructions
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit temperature selections but you may change this to use the Celsius selections.
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Press the BROIL HI/LO pad. The display will show F (Fahrenheit).
Press the BROIL HI/LO pad again. The display will show C (Celsius).
Press the START pad.
Control Lockout
Your control will allow you to lock out the touch pads so they cannot be activated when pressed.
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Press the SELF CLEAN pad. The display will show LOC OFF.
When this feature is on and the touch pads are pressed the control will beep and the display will show LOC.
NOTE: The control lockout mode will not affect the CLOCK and KITCHEN TIMER ON/OFF touch pads.
Care and Cleaning Troubleshooting Tips
Press the SELF CLEAN pad again.
The display will show LOC ON.
Press the START pad to activate the control lockout feature and leave the control set in this special features mode.
9
Consumer Support