Operating Instructions Safety Instructions
Using the oven controls.
(Throughout this manual, features and appearance may vary from your model.)
Oven Control, Clock and Timer Features and Settings
BAKE Pad | CLOCK Pad |
Touch to select the bake function. | Touch before setting the clock. |
Consumer Support Troubleshooting Tips Care and Cleaning
BROIL HI/LO Pad
Touch to select the broil function.
OVEN LIGHT Pad
Touch to turn the oven light on or off.
SELF CLEAN LO/STD Pad
Touch to select
See the Using the self-cleaning oven section.
START Pad
Must be touched to start any cooking or cleaning function.
Number Pads
Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and
CONTROL LOCKOUT
The control lockout is 9 and 0. Touch and hold the 9 and 0 pads at the same time for 3 seconds.
CLEAR/OFF Pad
Touch to cancel ALL oven operations except the clock, timer and control lockout.
KITCHEN TIMER ON/OFF Pad
Touch to select the timer feature.
DELAY START Pad
Use along with COOKING TIME or SELF CLEAN LO/STD pads to set the oven to start and stop automatically at a time you set.
COOKING TIME Pad
Touch and then touch the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.
Display
Shows the time of day, oven temperature, whether the oven is in the bake, broil or
If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code. Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service.
If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.
The time of day will flash in the display when there has been a power outage.
10