GE 49-80038, 164D4290P007 owner manual Instructions, Customer

Page 4

Instructions

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

SAFETY PRECAUTIONS

Service Troubleshooting Tips Care and Cleaning Operating Instructions Safety

■Do not store flammable materials in an oven or near the cooktop.

■CAUTION: Items of interest to children should not be stored in cabinets above a range or on the backsplash of a range—children climbing on the range to reach items could be seriously injured.

■Never wear loose-fitting or hanging garments while using the appliance. Be careful when reaching for items stored over the range. Flammable material could be ignited if brought in contact with hot surface units or heating elements and may cause severe burns.

■Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot surface units or heating elements. Do not use a towel or other bulky cloth in place of pot holders.

■For your safety, never use your appliance for warming or heating the room.

■Teach children not to play with the controls or any other part of the range.

■Always keep dish towels, dish cloths, pot holders and other linens a safe distance from your range.

■Always keep wooden and plastic utensils and canned food a safe distance from your range.

■Always keep combustible wall coverings, curtains or drapes a safe distance from your range.

■Do not let cooking grease or other flammable materials accumulate in or near the range.

■Keep the hood and grease filters clean to maintain good venting and to avoid grease fires.

■Do not use water on grease fires. Never pick up a flaming pan. Turn the controls off. Smother a flaming pan on a surface unit by covering the pan completely with a well-fitting lid, cookie sheet or flat tray. Use a multi-purpose dry chemical or foam-type fire extinguisher.

■Flaming grease outside a pan can be put out by covering it with baking soda or, if available, by using a multi-purpose dry chemical or foam-type fire extinguisher.

■Flame in the oven can be smothered completely by closing the oven door and turning the oven off or by using a multi- purpose dry chemical or foam-type fire extinguisher.

■Do not touch the surface units, the heating elements or the interior surface of the oven. These surfaces may be hot enough to burn even though they are dark in color. During and after use, do not touch, or let clothing or other flammable materials contact the surface units, areas nearby the surface units or any interior area of the oven; allow sufficient time for cooling first.

■Potentially hot surfaces include the cooktop, areas facing the cooktop, oven vent opening, surfaces near the opening, crevices around the oven door.

■REMEMBER: The inside surface of the oven may be hot when the door is opened.

■Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Customer

COOK MEAT AND POULTRY THOROUGHLY…

Cook meat and poultry thoroughly—meat to at least an INTERNAL temperature of 160°F. and poultry to at least an INTERNAL temperature of 180°F. Cooking to these temperatures usually protects against foodborne illness.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents RangesSelf-Cleaning Electric FC updatedGE & You, a Service Partnership Two Easy Ways To Register Your ApplianceTips Customer Service All ranges can tip and injury could resultInstructions CustomerSurface Cooking Units Safety Instructions Customer ServiceCleaning Operating Instructions CareUsing the surface units SafetyCleaning Troubleshooting Tips Customer ServiceOperating Instructions Safety Instructions Using the oven controlsCustomer Service Troubleshooting Tips Care and Cleaning Using the oven Care and CleaningHow to Set the Oven for Broiling SafetyBroiling Guide To BroilUsing the clock and timer Care and CleaningUsing the timed baking and roasting features Safety InstructionsHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopSafety Instructions Cleaning TroubleshootingHow to Set for Regular Baking/Roasting How to Exit the Sabbath FeatureAdjust the oven thermostat-Do it yourself Customer Service Troubleshooting Tips CareTo Adjust the Thermostat Type of margarine will affect baking performanceCare and Cleaning Troubleshooting Tips Customer Service Using the self-cleaning ovenBefore a Clean Cycle Cleaning Operating Instructions Safety Instructions Customer Service Troubleshooting Tips CareHow to Delay the Start of Cleaning After a Clean CycleCare and Cleaning Care and cleaning of the rangeTroubleshooting Tips Customer Service Cleaning Operating Instructions SafetyInstructions To clean the inside of the door To clean the outside of the doorLift-Off Oven Door To remove the doorOperating Instructions Safety Tips Care and CleaningOven Light Replacement Broiler Pan & GridCleaning Surface UnitsDrip Pans Lift-Up CooktopBefore You Call For Service… Oven temperature Power outageDuring a clean cycle Not unlock Oven not clean afterClean light flashes Clean light is onOn when range is not Oven makesWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Electric Range Warranty Care and Cleaning Troubleshooting Tips Customer ServiceSafety Instructions Operating GE Will ProvideService Telephone Numbers GE Answer Center

164D4290P007, 49-80038 specifications

The GE 49-80038,164D4290P007 is an advanced circuit breaker designed for industrial applications, providing robust protection and control in electrical distribution systems. This model is engineered by General Electric, a leading name in the field of energy management and electrical solutions. It exemplifies innovation, reliability, and efficiency, tailored for demanding environments.

One of the standout features of the GE 49-80038 is its high breaking capacity, which allows it to interrupt fault currents effectively. This feature is crucial for ensuring the safety of electrical systems as it reduces the risk of equipment damage and fire hazards. The circuit breaker also offers a range of current ratings, allowing it to be used in diverse applications while ensuring optimal performance.

A notable technology integrated into the GE 49-80038 is its electronic trip system. This technology enhances the breaker's ability to detect overloads and short circuits, enabling precise trip settings and minimizing nuisance tripping. The electronic trip unit is customizable, allowing users to set the desired protection levels according to their specific needs, thus increasing operational flexibility.

In terms of design, the GE 49-80038 is built for easy installation and maintenance. Its compact form factor allows it to fit into standard electrical panels without requiring excessive modifications. Furthermore, the device includes features for remote monitoring and control, integrating seamlessly into modern smart grid applications.

Durability is another hallmark of this circuit breaker. Constructed from high-quality materials, the GE 49-80038 can withstand harsh environmental conditions, including high temperatures and humidity levels. This resilience ensures a long service life, reducing the frequency and costs associated with replacements.

Additionally, the circuit breaker complies with international standards, making it suitable for installation in various regions without the need for modifications. This compliance ensures reliability and performance across different electrical systems globally.

In summary, the GE 49-80038,164D4290P007 represents a cutting-edge solution for circuit protection in industrial settings, featuring high breaking capacity, an advanced electronic trip system, ease of installation, and unmatched durability. Its blend of innovative technologies and robust characteristics makes it a favorite choice for electrical professionals looking to enhance the safety and efficiency of their systems.
Top Page Image Contents