Amana ACS7270A, ACS7280A Using the Oven Control, Flashing Display, Setting Electronic Clock

Using the Oven Control

8888HR : 8 8 8

BROIL CONV O

DELAY BAKE N

CLEAN LOCKED

DELAY BAKE CLN STOP TIMER

Flashing Display

When power is connected to oven display flashes. Press OVEN CANCEL to stop flashing.

Making the Numbers Increase at a Faster Rate

Time increases in larger increments the longer + or - pad is held.

Setting Electronic Clock

The 12 hour clock does not display AM, PM or military time. When power is connected or restored, display flashes until CLOCK pad is

pressed.

1. Press CLOCK pad.

• TIME displays

2.Press MORE or LESS pads until correct time-of-day displays.

3.Approximately 5 seconds after last change clock will set and automatically begin.

Setting Minute Timer

The timer is a timer only. Electronic timer does not control bake, broil, or self-clean function. Timer can be set up to 9 hours and 55 minutes. The minute timer can be used while oven is using other baking modes.

1.Press TIMER ON/OFF pad.

• TIMER displays

2.Press MORE or LESS pads until desired amount of

time displays.

• Timer displays minutes and seconds until one hour is reached, then hours and minutes

•Timer begins counting down automatically approximately 5 seconds after last time change

•To view time-of-day, press CLOCK pad

3.Press and hold TIMER ON/OFF pad to cancel timer signal.

•After time elapses, timer beeps 3 times, and then approximately once every 6-10 seconds until TIMER ON/OFF pad is pressed.

Resetting and Canceling Timer

To reset the time when remaining time is displayed press + or - pad until desired time displays. To cancel timer, press and hold TIMER ON/OFF pad for approximately 5 seconds. Do not press OVEN CANCEL pad. Pressing OVEN CANCEL pad cancels cooking function.

10