Avanti DGE 2403 SC warranty Replacing the Oven Light fig, Drawer, Removing the Oven Door

REPLACING THE OVEN LIGHT (fig. 5.7)

Before any maintenance is started involving electrical parts of the appliance, it must be disconnected from the power supply.

–Let the oven cavity and the heating elements cool down;

–Switch off the electrical supply;

–Remove the protective cover (fig. 5.7);

–Unscrew and replace the bulb with a new one suitable for high temperatures (300°C) having the following specifications: 120V, 60 Hz, 25W, E14

–Refit the protective cover

NOTE: Oven bulb replacement is not covered by your guarantee

DRAWER

The drawer (fig. 5.8) comes out like a normal drawer. A safety catch stops it from sliding out.

To remove the drawer open and lift it.

Do not store flammable material in the oven or in the drawer.

REMOVING THE OVEN DOOR

The oven door can easily be removed as follows:

–Open the door to the full extent (fig. 5.9a).

–Open the lever “A” completely on the left and right hinges (fig. 5.9b).

–Hold the door as shown in fig. 5.9.

–Gently close the door (fig. 5.9) until left and right hinge levers “A” are hooked to part “B” of the door (fig. 5.9b)

–Withdraw the hinge hooks from their location following arrow “C” (fig. 5.9d).

–Rest the door on a soft surface.

–To replace the door, repeat the above steps in reverse order.

Fig. 5.9a

A

B

Fig. 5.9b

B

A

Fig. 5.7

Fig. 5.8

Fig. 5.9

Fig. 5.9c

C
Fig. 5.9d	25