Connecting TV & DVD Player

QUICK START GUIDE

■Connecting a TV

• Connect the TV to the same type of Monitor video output that you did connect to the DVD player, as shown.

■Connecting a DVD Player

•Use a Component, S-video or (composite) video cable to connect this unit's VIDEO 2 to the corresponding video output on your DVD player, as shown.

•Use an Optical or Coaxial cable to connect this unit's OPT IN 2 or COAX IN 2 to the optical output or the coaxial output on your DVD player. (You don't need to do both.)

•Use an Audio (analog) cable to connect this unit's VIDEO 2 (L/R) to audio output on your DVD player.

•Use a HDMI cable to connect this unit's HDMI 2 to HDMI output on your DVD player.

	• There are three types of video jacks (COMPONENT, S-VIDEO, (composite) VIDEO) for analog video connections
	and the HDMI connector for digital video and audio connections.
	Connect them to the corresponding video jacks according to their capability.
	• For your reference, the exellence in picture quality is as follows : "HDMI" > "COMPONENT" > "S-VIDEO" > "(com-
	posite) VIDEO".
	• When making COMPONENT VIDEO connections, connect "Y" to "Y", "PB/CB" to "CB" (or "B-Y", "PB") and "PR/CR"
2	to "CR" (or "R-Y", "PR").
2	• The HDMI connection can carry uncompressed digital video signals and digital audio signals.