Turning on the Unit | QUICK |
| |
• Before using the remote control, first press the [AUD] button to control this unit. |
|
• To use the RF remote control function in some countries such as U.S.A., Canada, |
|
etc., refer to "Changing the transmission signal", etc. on the main operating |
|
instructions. | START GUIDE |
|
1.Connect the AC input cord.
2.Press the [POWER] switch on the front panel to enter the standby mode.
3.In the standby mode, press the [ON/STANDBY] button on the front panel or [POWER ON] button on the remote control to enter the operating mode.
4.Press the [SPEAKER] button to switch the speakers on.
Then the SPEAKER indicator [ 
] lights up and the sound can be heard from the speakers.
Playing a DVD Player (VIDEO 2)
6
|
|
|
| 4 |
4 | 3 | 4 | 6 | 4 |
1.Turn on your DVD player and TV.
2.Select the appropriate input on your TV.
3.Press the [VIDEO] button on the front panel to select [VIDEO 2] input source.
On the remote control, press the [VIDEO 2] button directly.
3
■In case that the HDMI connections between components are not made
4.When you want to play the digital signals from the connected digital input, press the [AUDIO ASSIGN] button to display "AUDIO ~ " and then rotate the [MULTI CONTROL] knob or press the CURSOR LEFT( ◀)/RIGHT(▶) buttons to select the desired of [OPTICAL 2] and [COAXIAL 2].
■Note :
| • If the AUDIO MODE is set to the mode other than "DIGITAL" for VIDEO 2 input source on the INPUT SETUP |
|
| menu, you cannot hear the sound from the selected digital input. (For details, refer to "SETTING THE INPUT |
|
| SETUP" on the main operating instructions.) |
|
5. | Start playback on your DVD player. | 3 |
6. | Adjust the volume. |