Verona VECTGMS365SS manual Conversion for LP or NG Gas, Converting Appliance for Use with LP Gas

Page 16

Installation Manual

ENGLISH

Conversion for LP or NG Gas

Converting Appliance for Use with LP Gas

WARNING

Conversion is to be performed by a AUTHOR- IZED SERVICER (or other qualified agency) in accordance with the manufacturer's instructions and all codes and requirements of the authority having jurisdiction. Failure to follow instructions could result in serious injury or property damage. The qualified agency performing this work as- sumes responsibility for this conversion.

WARNING

Electrical power and gas must be turned off prior to conversion.

If this appliance should be converted for use with gas LP (propane or butane), each of the following modifi- cation must be performed:

Replace injectors on (two rings flame burner)

1.Remove the grates and burner cups.

2.Remove aluminium gas spreader.

3.Remove the three screws of simmer gas spreader

(1).

4.Remove the two screws of injector cover (2).

5.Loosen injector (A) by turning 9-32” nut driver counter clockwise.

6.Loosen injector (B) by turning 9-32” box wrench counter clockwise.

7.Install the injectors supplied with this appliances in the appropriate burner. The injectors have small number stamped on the side, this number codes the orifice diameter and its correct burner location (see figure of the paragraph “Injectors position”).

8.Turn clockwise to tighten (tighten to a torque of 15 to 20 inch-lbs).

9.Replace all parts following the reverse order.

10.Save the injectors removed from the appli- ances for future use.

Replace injector on (one ring flame burners)

1.Remove the grates and burner cups.

2.Remove aluminum gas spreader.

3.Loosen injector by turning 9-32” nut driver counter clockwise.

4.Install the injectors supplied with this appliances in the appropriate burner. The injectors have small number stamped on the side, this number codes the orifice diameter and its correct burner location (see figure on page 18).

5.Turn clockwise to tighten (tighten to a torque of 15 to 20 inch-lbs).

6.Replace all parts following the reverse order.

7.Save the orifices removed from the appliance for future use.

017

Figure 17.

Figure 18.

16

Image 16
Contents VECTGMS365SS VECTGMS304SS Page Installation Manual Before Starting Installation Cooktop Installed over Oven InstallationPlease read all instructions before using this appliance Special WarningsProduct Dimensions and Cutout Requirements Important Preparation SuggestionsHole 1-1/5 3 cm Cutout requirementsThis cooktop has been designed with wide toler Mobile Home InstallationDards, Title 24 CFR, Part 3280 formerly the Federal Excessive Weight Hazard Cooktop InstallationCut Hazard Do not Over Tighten Important Notes for Gas Connection Gas RequirementNever Tighten to More than 35 ft lbs of Torque Gas Connection Threads of the Gas Manifold with gasket suppliedConducted by the Installer according to NECTION. Leak testing of the appliance shall beStructions given Pressure Testing Pressure Test MethodElectrical Requirements General InformationElectrical Connection Electrical RequirementsWiring diagram 30 wide Conversion for LP or NG Gas Converting Appliance for Use with LP GasReplace injectors on two rings flame burner Replace injector on one ring flame burnersConverting Appliances for Use with NG Gas Pressure regulator conversionInjectors position One ring flame burners Dual flame ringAdjustment for Burners with one or two rings Flame Low Flame AdjustmentCounterclockwise to increase Electric gas ignition Burner Flames’installateur Tables des matieresRencontrerez dans ce manuel Au clientAvant de Procéder à l’Installation Installation de la Table de Cuisson Au-Dessus du FourAvertissement Spéciaux Que faire si vous sentez une odeur de gazDimensions et Dispositions pour la Découpe Suggestions Importantes de PréparationDiamètre du trou 1-1/5’’ 3 cm Dispositions pour la découpeInstallation autocaravane Risque du fait du poids excessif Installation de la Table de CuissonRisque de coupure Bien Serrer Mais PAS Trop Fort Conditions Requires Gaz NE Jamais Serrer À Plus DE 35 ft Ibs pieds livre DE TorsionRaccordement du Gaz Tructions données Vérification de la Pression Méthode de Test de PressionConditions Requises Electricité Information GénéralBranchement Electrique Requises ElectricitéSchéma électrique largeur Conversion Gaz PL ou Gaz Naturel Conversion de l’Appareil pour Fonctionner au Gaz PLRemplacez un injecteur brûleur avec deux anneaux de flamme Remplacez un injecteur Brûleurs avec un anneau de flammeConversion du régulateur de pression Régulateur de pressionConversion PL Position des InjecteursRéglage Petite Flamme Réglage pour brûleurs avec un ou deux anneaux de flammeAllumage à gaz électrique Les Flammes du BrûleurTabela de Contenido PaginaLEA Y Conserve Estas INSTRUCCIONES. Instalador ClienteAdvertencias Especiales Antes de comenzar la instalaciónQué hacer si detecta olor a gas Instalación de la placa sobre un hornoDimensiones del Producto y de Encastre Importantes Consejos de PreparaciónDiámetro orificio 1-1/5’’ 3 cm NotaInstalación en Casas Móviles Peso excesivo Instalación de la Placa de CocciónPeligro de corte Figura Paso Observaciones importantes para la conexión del gas Conexión del Gas RequisitosNunca Apriete a MÁS DE 35 pies-libras DE Torque Conexión del Gas FiguraCabo por el instalador, que tendrá que seguir las COS DE GAS. La prueba de fugas debe ser llevadaInstrucciones suministradas Prueba de Presión Método de la prueba de presiónConexión Eléctrica Requisitos Conexión EléctricaConexión Eléctrica Requisitos Peligro de descarga eléctricaFigura 15. Diagrama eléctrico ancho Conversión del Electrodoméstico para su Uso con Gas LP Conversión a Gas LP o NGSustitución del inyector una sola corona Conversión del Regulador de Presión Figura 20. Regulador de presiónConversión LP Posición de los InyectoresGraduación de la Llama Baja Figura 21. Graduación de la llamaIgnición eléctrica del gas Las llamas del quemadorDelgada introducido en la cavidad correspondiente al Centro del vástago hasta apretar a fondo la válvulaPage Page Page EuroChef USA, Inc
Related manuals
Manual 40 pages 17.75 Kb

VECTGMS304SS, VECTGMS365SS specifications

The Verona VECTGMS365SS and VECTGMS304SS represent the pinnacle of modern kitchen technology, seamlessly merging functionality with culinary artistry. Both models from Verona’s extensive range of kitchen appliances offer features designed for both the home chef and the kitchen enthusiast.

The Verona VECTGMS365SS is a robust gas range that boasts a 36-inch width, featuring a total of five sealed burners. This model's powerful burners provide a customizable cooking experience, allowing users to select the perfect flame for simmering sauces or achieving a high-heat sear on meats. With an impressive total output of 18,000 BTUs on its two high-powered burners, the VECTGMS365SS offers remarkable control over temperature. An additional advantage of this range is its spacious oven, which has a capacity of 5.2 cubic feet, providing ample space for cooking large meals.

In addition to sheer power, this model incorporates advanced technologies such as infrared broiling, which enables even heating and precision cooking. The continuous cast-iron grates ensure that pots and pans easily slide from burners to the oven, minimizing disruptions during cooking. The range is designed with a modern aesthetic, featuring a stainless steel finish that not only enhances its durability but also adds a contemporary touch to any kitchen.

On the other hand, the Verona VECTGMS304SS offers a slightly smaller footprint at 30 inches, yet it retains powerful and versatile cooking capabilities. It also features four sealed burners, with a maximum output of 15,000 BTUs, suitable for a variety of cooking techniques. The oven capacity is slightly smaller at 4.5 cubic feet, but it is still spacious enough for everyday cooking needs.

Both models are equipped with user-friendly electronic ignition systems, meaning they ignite quickly and safely. They also come with an oven light and multiple cooking modes, including bake, broil, and convection settings, ensuring fluffy pastries and perfectly roasted meats.

Overall, the Verona VECTGMS365SS and VECTGMS304SS exemplify the perfect marriage of performance and style in kitchen ranges. With exceptional heating power, precision technology, and sleek designs, they cater to the diverse needs of modern kitchens, making them an excellent choice for anyone looking to elevate their cooking experience. Whether for family dinners or entertaining guests, these ranges ensure that meals can be prepared with both ease and sophistication.