Southbend KELT-20, KELT-100 specifications KELT-30, KELT-40, KELT-60, KELT-80

ELECTRIC STEAM TILTING KETTLE

*Kettle shown with

Optional Spring Assist Cover

SPECIFICATIONS:

Shall be a Model__________________________________ ,

self-generating, electric tilting kettle. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat circulation.

The console shall be drip proof, stainless steel clad and shall be supported on all welded, 1-5/8" (41mm) diameter stainless steel frame and legs fitted with 4 hole adjustable flanged feet for securing to floor.

The kettle shall pivot on trunnions connected to the tilt mechanism and the outbore bearing connected to the frame and shall permit the kettle to tilt forward a full 90 for complete emptying. The tilt mechanism shall be self locking for positive stop action.

Construction shall be all welded #4 finish stainless steel, type

304.The controls shall be integrally mounted and shall include a power switch, thermostat, pilot light, low water light, vacuum/ pressure gauge, safety relief valve, and low water shut off.

The kettle shall be standard with removable elements.

The kettle shall operate in a temperature range of 100°F to 290°F (38°C to 144°C) at a maximum pressure of 50 psi (345kPa).

MODEL		CAPACITY
KELT-20	20 Gallon	76 Liter
KELT-30	30 Gallon	114 Liter
KELT-40	40 Gallon	152 Liter
KELT-60	60 Gallon	227 Liter
KELT-80	80 Gallon	303 Liter
KELT-100	100 Gallon	379 Liter

OPERATION SHALL BE BY:

Electrically, self-generating closed steam system operating at 50 psi equipped for operation on:

❑208 VAC, 3 Phase, 50/60 Hz

❑208 VAC, 1 Phase, 50/60 Hz*

❑240 VAC, 3 Phase, 50/60 Hz

❑240 VAC, 1 Phase, 50/60 Hz*

OPTIONAL ITEMS AT EXTRA COST:

❑Type 316 stainless steel liner for high acid content products

❑1-1/2" (38 mm) draw off valve

❑2" (50 mm) draw off valve

❑3" (76 mm) draw off valve

❑2" (50 mm) dairy valve

❑3" (76 mm) dairy valve

❑24 kw on 40, 60, 80 gallon

❑33 kw on 60, 80, 100 gallon

❑220 VAC, 1 Phase, 50/60 Hz*

❑220 VAC, 3 Phase, 50/60 Hz

❑380 VAC, 3 Phase, 50/60 Hz

❑415 VAC, 3 Phase, 50/60 Hz

❑480 VAC, 3 Phase, 50/60 Hz

❑220/380 VAC, 3 Phase, 4 wire

❑240/415 VAC, 3 Phase, 4 wire

❑One piece lift off stainless steel cover

❑Spring assist hinged stainless steel cover

❑Etched gallon markings

❑Etched litre markings

❑Correctional package *20 and 30 gallon only

ACCESSORIES:

ˆTriple basket assembly

ˆPerforated strainer for draw off

ˆSolid stainless steel disc for draw off valve

ˆGraduated measuring stick

ˆStrainer hook

ˆDouble pantry faucet with swing spout

ˆSingle pantry faucet with swing spout

ˆPan support

ˆPour strainer

ˆCalibrated thermostat dial “C”

ˆCalibrated thermostat dial “F”

Job

Item#

Form KELT Rev 0 (01/07) Printed in USA