ESP Control, Status light error messages

ESP CONTROL

Power Light

Indicates power to the control.

Secondary function: Blinks every 15 seconds when the feed adjuster is in "Test Mode". This verifies feeder switch operation. Should be lit anytime the unit is pluged in.

Status Light

Will be lit in either stove or room temp mode when pointer is not within off position band except after normal shut down. Blinks to indicate errors listed listed below.

Indicates power to distribution blower.

Indicates Power to combustion blower

Indicates Power to the feed motor.

Temp dial

Allows you to adjust the Room temperature in Room Temp Mode using the outer scale marked in degrees Fahrenheit. It also allows you to adjust the stove temperature while in Stove Temp Mode using the inner scale marked from 1 to 7.

Feed adjuster

Sets the maximum feed rate

Test

Runs all motors at full speed for two minutes to check operation. After two minutes the stove will go to minimum burn and the blowers will alternate from high to low every two minutes to remind you that you are still in "Test Mode".

Distribution Blower speed adjustment range.

Mode Selector

Allows you to choose between Room Temp Mode, Stove Temp Mode, or OFF. Also allows you to vary the distribution blower speed by turning the knob to the high or low side of each mode.

Status light error messages:

1 Blink: Indicates control board self diagnostic fail- ure. This requires a manual reset*.

2 Blinks: Indicates that the feeder position switch has not sensed the slide plate in the home position for 30 minutes. This means that the slide plate may be stuck due to a foreign object in the fuel or the switch has failed. If the switch has failed the stove will operate normally, however if turned to the "OFF

"position the stove will go to minimum burn and will only shut down when it runs out of fuel. If the slide plate frees itself the status light will automatically

reset. If the error continues call your Harman Dealer. 3 Blinks: Indicates ESP (Exhaust Sensing Probe) failure. This requires a manual reset*.

4 Blinks: Can occur only in Room Temp Mode and indicates Room Sensing Probe failed or not installed. If a Room Sensing Probe is then installed the status light will automatically reset.

(Note) only after unit has warmed up.

*Manual reset, disconnect power cord for a few seconds and reconnect. If error still occurs call your Dealer.

R6 specifications

The Harman Stove Company R6 is a standout option in the domain of high-efficiency heating solutions. This pellet stove combines cutting-edge engineering with user-friendly features, making it an excellent choice for homeowners looking to enhance their heating systems. One of the primary attractions of the R6 model is its impressive heat output, boasting an array of innovative technologies designed for optimal performance.

The R6 delivers an exceptional heating capacity, sufficient for spaces up to 2,500 square feet, making it ideal for larger areas or even entire homes. A significant feature of the R6 is its patented "Smart Control" technology, which allows users to program heat settings based on their schedules and preferences. This capability not only enhances convenience but also increases energy efficiency, reducing fuel consumption and lowering heating costs.

Another vital characteristic of the Harman R6 is its superior airflow management system, ensuring even heat distribution throughout the room. This feature prevents hot spots and cold corners, promoting a more comfortable and consistent indoor environment. The stove's large firebox can accommodate a variety of pellet types, including premium hardwood, making it versatile and adaptable to different user needs.

The construction of the R6 is robust, utilizing high-quality materials that assure durability and longevity. The stove is equipped with a window that provides a captivating view of the flame, creating a cozy ambiance while also allowing users to monitor the burn. Furthermore, the R6 has a clean burn technology that minimizes emissions, meeting stringent environmental standards.

Maintenance is simplified with the Harman R6, thanks to features like its easy-access ash pan and combustion chamber. Regular cleaning and upkeep are crucial for maintaining performance, and the R6 is designed to make this process as straightforward as possible.

In summary, the Harman Stove Company R6 is an advanced heating solution that merges efficiency, convenience, and aesthetic appeal. With its impressive heating capacity, programmable features, and commitment to environmental responsibility, it represents a solid investment for any homeowner seeking reliable and effective heating solutions. Whether for new installations or upgrades, the R6 is sure to exceed expectations and deliver warmth for years to come.