Brinkmann 4210 owner manual Step

Page 28

Step 10

Attach heat shield to the underside of grill body assembly. Place heat shield over the four M5 X 53mm bolts installed in Step 9 and secure with four M5 nuts.

Step 11

Slide grease cup into grease cup brackets located on the bottom of the heat shield.

Step 12

Remove igniter cap and insert battery with positive end of battery toward igniter cap. Replace igniter cap and make sure the igniter is working properly.

Igniter Cap Battery

Image 28

Contents Heavy-Duty Gas Grill Important Safety For Your SafetyTable of Contents General Warnings Installation Information LP GAS Cylinder not Supplied with this GrillCylinder Specifications Installing the LP GAS Cylinder Onto the Grill Regulator Resetting ProcedureFilling the LP GAS Cylinder Hose and RegulatorConnecting Hose and Regulator to AN LP GAS Cylinder Connecting Hose and RegulatorWhen to Perform a Leak Test Leak TestingChecking for Leaks PRE-START Check List Lighting the Main Burners Lighting InstructionsMatch Lighting the Main Burners Turning OFF the Grill SafeguveOperating the Grill Breaking in Your GrillPreheating the Grill Controlling FLARE-UPSCleanliness Rotisserie CookingGrilling to Proper Temperature Helpful HintsCleaning and Maintenance Burner ASSEMBLY/MAINTENANCECooking Grills Heat Distribution PlatesTransporting and Storage Before Storing Your GrillTrouble Shooting Frequently Asked Questions Frequently Asked Questions Parts BAG Contents Assembly Instructions For Missing PARTS, Please Call Customer Service AT Step Attach front panel to legs using four M6 X 12mm bolts Step Grill Body Assembly Short Spacers Bolts Legs Step ProSeries 4210 Assembled Accessories Gallon PAN & Basket SET Warranty