Brinkmann owner manual ProSeries 4210 Assembled

Page 29

Warming Rack

Cooking Grill

Heat

Distribution

Plates

ProSeries 4210 (Assembled)

Step 13

Place the heat distribution plates on lower level of grill body assembly directly above burners.

Step 14

Place cooking grills on support ribs directly above porcelain heat distribution plates.

Step 15

Place warming rack on lip so that it sits above the cooking grills.

28

Image 29

Contents Heavy-Duty Gas Grill For Your Safety Important SafetyTable of Contents General Warnings LP GAS Cylinder not Supplied with this Grill Installation InformationCylinder Specifications Regulator Resetting Procedure Installing the LP GAS Cylinder Onto the GrillFilling the LP GAS Cylinder Hose and RegulatorConnecting Hose and Regulator Connecting Hose and Regulator to AN LP GAS CylinderChecking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Main Burners Lighting InstructionsLighting the Main Burners Safeguve Turning OFF the GrillBreaking in Your Grill Operating the GrillPreheating the Grill Controlling FLARE-UPSRotisserie Cooking CleanlinessHelpful Hints Grilling to Proper TemperatureBurner ASSEMBLY/MAINTENANCE Cleaning and MaintenanceHeat Distribution Plates Cooking GrillsTransporting and Storage Before Storing Your GrillTrouble Shooting Frequently Asked Questions Frequently Asked Questions Parts BAG Contents Assembly Instructions For Missing PARTS, Please Call Customer Service AT Step Attach front panel to legs using four M6 X 12mm bolts Step Grill Body Assembly Short Spacers Bolts Legs Step ProSeries 4210 Assembled Accessories Gallon PAN & Basket SET Warranty